Products
Abaqus/Standard
Abaqus/Explicit
Abaqus/CAE
Complete Material Definitions
Abaqus requires that the material be sufficiently defined to provide suitable properties
for those elements with which the material is associated and for all analysis
procedures through which the model will be run. Thus, a material associated with
displacement or structural elements must include either a “Complete mechanical”
category behavior or an “Elasticity” category behavior, as discussed below. In Abaqus/Explicit density (Density) is required for all materials
except hydrostatic fluids.
It is impossible to modify or add to material definitions once an analysis is
started. However, material definitions can be modified in an import analysis. For
example, a static analysis can be run in Abaqus/Standard using a material definition that does not include a density specification.
Density can be added to the material definition when the analysis is imported into
Abaqus/Explicit.
All aspects of a material's behavior need not be fully defined; any behavior that is
omitted is assumed not to exist in that part of the model. For example, if elastic
material behavior is defined for a metal but metal plasticity is not defined, the
material is assumed not to have a yield stress. You must ensure that the material is
adequately defined for the purpose of the analysis. The material can include
behaviors that are not relevant for the analysis, as described in About the Material Library. Thus, you can include general material behavior
libraries, without having to delete those behaviors that are not required for a
particular application. This generality offers great flexibility in material
modeling.
In Abaqus/Standard any material behaviors defined using a distribution (Distribution Definition) can be
combined with almost all material behaviors in a manner identical to how they are
combined when no distributions are used. For example, if the linear elastic material
behavior is defined using a distribution, it can be combined with metal plasticity
or any other material behavior that can normally be combined with linear elastic
behavior. In addition, more than one material behavior defined with a distribution
(linear elastic behavior and thermal expansion, for example) can be included in the
same material definition. The only exception is that a material defined with
concrete damaged plasticity (Concrete Damaged Plasticity) cannot
have any material behaviors defined with a distribution.
Material Behavior Combination Tables
The material behavior combination tables that follow explain which behaviors must be
used together. The tables also show the material behaviors that cannot be combined.
Behaviors designated with an (S) are available only in Abaqus/Standard; behaviors designated with an (E) are available only in Abaqus/Explicit.
The behaviors are assigned to categories because exclusions are best described in
terms of those categories. Some of the categories require explanation:
-
“Complete mechanical behaviors” are those behaviors in Abaqus that, individually, completely define a material's mechanical
(stress-strain) behavior. A behavior in this category, therefore, excludes
any other such behavior and also excludes any behavior that defines part of
a material's mechanical behavior: those behaviors that belong to the
elasticity and plasticity categories.
-
“Elasticity, fabric, and equation of state behaviors” contains all the basic
elasticity behaviors in Abaqus. If a behavior from the “Complete mechanical behaviors” category is not
used and mechanical behavior is required, a behavior must be selected from
this category. This selection then excludes any other elasticity behavior.
-
“Enhancements for elasticity behaviors” contains behaviors that extend the
modeling provided by the elasticity behaviors in Abaqus.
-
“Rate-independent plasticity behaviors” contains all the basic plasticity
behaviors in Abaqus except deformation plasticity, which is in the “Complete mechanical
behaviors” category because it completely defines the material's mechanical
behavior.
-
“Rate-dependent plasticity behaviors” contains behaviors that extend the
modeling provided by the rate-independent plasticity behaviors and by the
linear elastic material behavior.
If elastic-plastic behavior must be modeled, you should select an appropriate
plasticity behavior from one of the plasticity behaviors categories and an
elasticity behavior from one of the elasticity behaviors categories.
General Behaviors:
These behaviors are unrestricted.
| Behavior |
Keyword |
Requires |
| Material damping |
DAMPING |
Elasticity, fabric, equation of
state (except ignition and growth equation of state),
hyperelasticity, hyperfoam, low-density foam, or anisotropic
hyperelasticity (except when used with beam or shell general
sections or substructures) |
| Density |
DENSITY |
Required in Abaqus/Explicit, except for hydrostatic fluid elements |
| Solution-dependent state variables |
DEPVAR |
|
| Thermal expansion |
EXPANSION |
|
Complete Mechanical Behaviors:
These behaviors are mutually exclusive and exclude all behaviors listed for
elasticity, plasticity, and hydrostatic fluid behaviors, including all related
enhancements. However, when an element is enriched (Modeling Discontinuities as an Enriched Feature Using the Extended Finite Element Method), the
mechanical user material behavior can be used with the progressive damage and
failure behavior, which is in the enhancement for elasticity or plasticity
behaviors category.
Elasticity, Fabric, and Equation of State Behaviors:
These behaviors are mutually exclusive.
Enhancements for Elasticity Behaviors:
| Behavior |
Keyword |
Requires |
| Elastic shear behavior for an
equation of state(E) |
ELASTIC,
TYPE=SHEAR |
Equation of state |
| Strain-based failure measures |
FAIL STRAIN |
Elasticity |
| Stress-based failure measures |
FAIL STRESS |
Elasticity |
| Hysteresis(S) |
HYSTERESIS |
Hyperelasticity (excludes all
plasticity behaviors and Mullins effect) |
| Mullins effect |
MULLINS EFFECT |
Hyperelasticity (excludes
hysteresis), hyperfoam, or anisotropic hyperelasticity |
| Compressive failure
theory(S) |
NO COMPRESSION |
Elasticity |
| Tension failure
theory(S) |
NO TENSION |
Elasticity |
| Paperboard
ZD compression
elasticity |
PAPERBOARD THICKNESS COMPRESSION ELASTIC |
Orthotropic elasticity with
decoupled in-plane and out-of-plane responses |
| Viscoelasticity |
VISCOELASTIC |
Elasticity, hyperelasticity, or
hyperfoam (excludes all plasticity behaviors and all associated
plasticity enhancements); or anisotropic hyperelasticity
|
| Shear viscosity for an equation of state(E) |
VISCOSITY |
Equation of state |
Rate-Independent Plasticity Behaviors:
These behaviors are mutually exclusive.
| Behavior |
Keyword |
Requires |
| Brittle cracking(E) |
BRITTLE CRACKING |
Isotropic elasticity and brittle
shear |
| Modified Drucker-Prager/Cap
plasticity |
CAP PLASTICITY |
Drucker-Prager/Cap plasticity
hardening and isotropic elasticity or porous elasticity |
| Cast iron plasticity |
CAST IRON PLASTICITY |
Cast iron compression hardening,
cast iron tension hardening, and isotropic elasticity |
| Cam-clay plasticity |
CLAY PLASTICITY |
Isotropic elasticity, orthotropic
elasticity, or porous elasticity (in Abaqus/Standard) |
| Isotropic elasticity or orthotropic elasticity (in Abaqus/Explicit) |
| Concrete(S) |
CONCRETE |
Isotropic elasticity |
| Concrete damaged plasticity |
CONCRETE DAMAGED PLASTICITY |
Concrete compression hardening,
concrete tension stiffening, and isotropic elasticity |
| Crushable foam plasticity |
CRUSHABLE FOAM |
Crushable foam hardening and
isotropic elasticity or orthotropic elasticity |
| Drucker-Prager
plasticity |
DRUCKER PRAGER |
Drucker-Prager hardening and
isotropic elasticity, orthotropic elasticity, or porous
elasticity (in Abaqus/Standard) |
| Drucker-Prager hardening and isotropic elasticity,
orthotropic elasticity, or the combination of an equation of
state and isotropic linear elastic shear behavior for an
equation of state (in Abaqus/Explicit) |
| Plastic compaction behavior for an
equation of state(E) |
EOS COMPACTION |
Linear
equation of state |
| Jointed material(S) |
JOINTED MATERIAL |
Isotropic elasticity and a local
orientation |
| Mohr-Coulomb plasticity |
MOHR COULOMB |
Mohr-Coulomb hardening and
isotropic elasticity |
| Paperboard in-plane
plasticity |
PAPERBOARD PLASTICITY |
Orthotropic elasticity with
decoupled in-plane and out-of-plane responses |
| Paperboard thickness compression
plasticity |
PAPERBOARD THICKNESS COMPRESSION PLASTICITY |
Orthotropic elasticity with
decoupled in-plane and out-of-plane responses, and paperboard
thickness compression elasticity |
| Paperboard out-of-plane shear
plasticity |
PAPERBOARD TRANSVERSE SHEAR PLASTICITY |
Orthotropic elasticity with
decoupled in-plane and out-of-plane responses |
| Metal plasticity |
PLASTIC |
Elasticity or hyperelasticity (in
Abaqus/Standard) |
| Isotropic elasticity, orthotropic
elasticity (requires anisotropic yield), hyperelasticity, or the
combination of an equation of state and isotropic linear elastic
shear behavior for an equation of state (in Abaqus/Explicit) |
Rate-Dependent Plasticity Behaviors:
These behaviors are mutually exclusive, except metal creep and time-dependent
volumetric swelling.
| Behavior |
Keyword |
Requires |
| Cap creep(S) |
CAP CREEP |
Elasticity, modified
Drucker-Prager/Cap plasticity, and Drucker-Prager/Cap plasticity
hardening |
| Metal creep(S) |
CREEP |
Elasticity (except when used to
define rate-dependent gasket behavior; excludes all
rate-independent plasticity behaviors except metal plasticity)
|
| Drucker-Prager creep(S) |
DRUCKER PRAGER CREEP |
Elasticity, Drucker-Prager
plasticity, and Drucker-Prager hardening |
| Metal plasticity |
PLASTIC,
RATE |
Elasticity or hyperelasticity (in Abaqus/Standard) |
| Isotropic elasticity, orthotropic elasticity (requires
anisotropic yield), hyperelasticity, or the combination of an
equation of state and isotropic linear elastic shear behavior
for an equation of state (in Abaqus/Explicit) |
| Nonlinear viscoelasticity |
VISCOELASTIC,
NONLINEAR |
Hyperelasticity |
| Rate-dependent viscoplasticity |
RATE DEPENDENT |
Drucker-Prager plasticity,
crushable foam plasticity, or metal plasticity |
| Time-dependent volumetric
swelling(S) |
SWELLING |
Elasticity (excludes all
rate-independent plasticity behaviors except metal plasticity)
|
| Two-layer
viscoplasticity(S) |
VISCOUS |
Elasticity and metal plasticity
|
Enhancements for Plasticity Behaviors:
| Behavior |
Keyword |
Requires |
| Annealing temperature |
ANNEAL TEMPERATURE |
Metal plasticity |
| Brittle failure(E) |
BRITTLE FAILURE |
Brittle cracking and brittle shear
|
| Cyclic hardening |
CYCLIC HARDENING |
Metal plasticity with nonlinear
isotropic/kinematic hardening |
| Inelastic heat fraction |
INELASTIC HEAT FRACTION |
Metal plasticity and specific heat
|
| Oak Ridge National Laboratory
constitutive model(S) |
ORNL |
Metal plasticity, cycled yield
stress data, and, usually, metal creep |
| Porous material failure
criteria(E) |
POROUS FAILURE CRITERIA |
Porous metal plasticity |
| Porous metal plasticity |
POROUS METAL PLASTICITY |
Metal plasticity |
| Hill anisotropic yield/creep |
POTENTIAL,
TYPE=HILL |
Metal plasticity, metal creep,
Cam-clay plasticity, crushable foam plasticity, Drucker-Prager
plasticity, or two-layer viscoplasticity |
| Nonquadratic yield(E) |
POTENTIAL
(except
TYPE=HILL) |
Metal plasticity |
| Shear failure(E) |
SHEAR FAILURE |
Metal plasticity |
| Tension cutoff |
TENSION CUTOFF |
Mohr-Coulomb plasticity |
Enhancement for Elasticity or Plasticity Behaviors:
| Behavior |
Keyword |
Requires |
| Tensile
failure(E) |
TENSILE FAILURE |
Metal plasticity or
equation of state |
| Damage initiation |
DAMAGE INITIATION |
For elasticity behaviors: elasticity based on a
traction-separation description for cohesive elements or
elasticity model for fiber-reinforced compositesFor
plasticity behaviors: elasticity and metal plasticity or
Drucker-Prager plasticity |
| Damage evolution |
DAMAGE EVOLUTION |
Damage initiation |
| Damage stabilization |
DAMAGE STABILIZATION |
Damage evolution |
| Transverse shear |
TRANSVERSE SHEAR |
Mechanical behaviors associated with shell or beam elements
|
Thermal Behaviors:
The following behavior is unrestricted:
The following behaviors are unrestricted but exclude thermal user materials:
Complete Thermal Behavior:
This behavior is unrestricted but excludes the thermal behaviors in the previous
table.
| Behavior |
Keyword |
Requires |
| Thermal user material |
USER MATERIAL,
TYPE=THERMAL |
Density |
Pore Fluid Flow Behaviors:
These behaviors are unrestricted.
| Behavior |
Keyword |
Requires |
| Swelling gel(S) |
GEL |
Permeability, porous bulk moduli,
and absorption/exsorption behavior |
| Moisture-driven
swelling(S) |
MOISTURE SWELLING |
Permeability and
absorption/exsorption behavior |
| Permeability(S) |
PERMEABILITY |
|
| Porous bulk moduli(S) |
POROUS BULK MODULI |
Permeability and either elasticity
or porous elasticity |
| Absorption/exsorption
behavior(S) |
SORPTION |
Permeability |
Electrical Behaviors:
These behaviors are unrestricted.
These behaviors are mutually exclusive.
Enhancements for Electrical Behaviors:
Mass Diffusion Behaviors:
These behaviors exclude all other behaviors.
| Behavior |
Keyword |
Requires |
| Mass diffusivity(S) |
DIFFUSIVITY |
Solubility |
| Solubility(S) |
SOLUBILITY |
Mass diffusivity |
Hydrostatic Fluid Behaviors:
|