*PAPERBOARD THICKNESS COMPRESSION ELASTIC

Define the out-of-plane compression elasticity for the paperboard model.

This option is used to define the out-of-plane compression elasticity of the paperboard model.

This page discusses:

See Also
In Other Guides
ZD Response

Products Abaqus/Standard Abaqus/Explicit

Type Model data

LevelModel

Required parameters

VOID RATIO

Set this parameter equal to the original void to solid ratio, r o r i g .

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variables included in the definition of the out-of-plane compression elasticity. If this parameter is omitted, the out-of-plane compression elasticity is assumed not to depend on any field variables but might still depend on temperature. See Material Data Definition for more information.

Data line to define the out-of-plane compression elasticity

First line
  1. Elasticity parameter μ .

  2. Elasticity parameter σ Z t . (Units of FL−2.)

  3. Temperature, θ .

  4. Etc., up to five field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)
  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this data line as often as necessary.