*PAPERBOARD PLASTICITY

Specify the in-plane paperboard plasticity model.

This option is used to define the exponent and plastic Poisson's ratios used in the paperboard in-plane yield function. It must be used in conjunction with the PAPERBOARD HARDENING option.

This page discusses:

See Also
*PAPERBOARD HARDENING
In Other Guides
Yield Criteria

Products Abaqus/Standard Abaqus/Explicit

Type Model data

LevelModel

Required parameters

EXPONENT

Set this parameter equal to the exponent in the yield function. This value must be an even positive number.

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variables included in the definition of the paperboard plasticity properties. If this parameter is omitted, the paperboard plasticity properties are assumed not to depend on any field variables but might still depend on temperature. See Material Data Definition for more information.

Data line to define the plastic Poisson's ratio

First line
  1. Tensile plastic Poisson's ratio in 1-direction, υ 1 p .

  2. Tensile plastic Poisson's ratio in 2-direction, υ 2 p .

  3. Compressive plastic Poisson's ratio in 1-direction, υ 4 p .

  4. Compressive plastic Poisson's ratio in 2-direction, υ 5 p .

  5. Temperature, θ .

  6. Etc., up to three field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than three)
  1. Fourth field variable.

  2. Etc., up to eight field variables per line.

Repeat this data line as often as necessary.