*PAPERBOARD HARDENING

Specify the hardening data of the in-plane paperboard plasticity model.

This option is used to specify the hardening data for the in-plane paperboard plasticity model defined using the PAPERBOARD PLASTICITY option.

This page discusses:

See Also
*PAPERBOARD PLASTICITY
In Other Guides
Hardening

Products Abaqus/Standard Abaqus/Explicit

Type Model data

LevelModel

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variables included in the definition of the paperboard in-plane plasticity hardening data. If this parameter is omitted, the hardening data are assumed not to depend on any field variables but might still depend on temperature. See Material Data Definition for more information.

Data lines to define the paperboard in-plane hardening

First line
  1. σ 1 0 . (Units of FL−2.)

  2. A 1 . (Units of FL−2.)

  3. B 1 .

  4. C 1 . (Units of FL−2.)

  5. σ 2 0 . (Units of FL−2.)

  6. A 2 . (Units of FL−2.)

  7. B 2 .

  8. C 2 . (Units of FL−2.)

Second line
  1. σ 3 0 . (Units of FL−2.)

  2. A 3 . (Units of FL−2.)

  3. B 3 .

  4. C 3 . (Units of FL−2.)

  5. σ 4 0 . (Units of FL−2.)

  6. A 4 . (Units of FL−2.)

  7. B 4 .

  8. C 4 . (Units of FL−2.)

Third line
  1. σ 5 0 . (Units of FL−2.)

  2. A 5 . (Units of FL−2.)

  3. B 5 .

  4. C 5 . (Units of FL−2.)

  5. Temperature, θ .

  6. Etc., up to three field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than three)
  1. Fourth field variable.

  2. Etc., up to eight field variables per line.

Repeat this data line as often as necessary.