Products
Abaqus/Standard
Abaqus/Explicit
Abaqus/CAE
Type
Model data
LevelModel
Abaqus/CAE
Property module
Optional parameters
-
DEPENDENCIES
-
Set this parameter equal to the number of field variable dependencies included in the
definition of the porous bulk moduli. If this parameter is omitted, it is assumed that
the porous bulk moduli are constant or depend only on temperature.
This parameter is not active for cohesive elements.
Data lines to define bulk moduli
- First line
-
Bulk modulus of solid grains. (Units of FL−2.)
If this entry is blank or zero, this value is assumed to be infinite.
Bulk modulus of permeating fluid. (Units of
FL−2.) If this entry is blank or zero, this value is
assumed to be infinite.
Temperature.
First field variable.
Second field variable.
Etc., up to five field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than five)
-
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
dependence of the porous bulk moduli on temperature and other predefined field
variables.
Data line for cohesive elements
- First (and only) data line
-
. (Units of FL−2.)
Biot’s
coefficient then follows from the identity
, where
is given by the ELASTIC,
TYPE=TRACTION
option.