*PAPERBOARD THICKNESS COMPRESSION PLASTICITY

Define the out-of-plane compression yield surface for the paperboard model.

This option is used to define the out-of-plane compression yield surface of the paperboard model. It must be used in conjunction with the PAPERBOARD THICKNESS COMPRESSION ELASTIC option.

This page discusses:

See Also
*PAPERBOARD THICKNESS COMPRESSION ELASTIC
In Other Guides
ZD Response

Products Abaqus/Standard Abaqus/Explicit

Type Model data

LevelModel

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variables included in the definition of the out-of-plane compression yield surface. If this parameter is omitted, the out-of-plane compression yield surface is assumed not to depend on any field variables but might still depend on temperature. See Material Data Definition for more information.

Data line to define the out-of-plane compression yield surface

First line
  1. A σ . (Units of FL−2.)

  2. B σ . (Units of FL−2.)

  3. C σ .

  4. Temperature, θ .

  5. Etc., up to four field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than four)
  1. Fifth field variable.

  2. Etc., up to eight field variables per line.

Repeat this data line as often as necessary.