*PAPERBOARD TRANSVERSE SHEAR PLASTICITY

Define the transverse shear yield surface for the paperboard model.

This option is used to define the transverse shear yield surface of the paperboard model.

This page discusses:

See Also
In Other Guides
Out-of-Plane Shear Response

Products Abaqus/Standard Abaqus/Explicit

Type Model data

LevelModel

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variables included in the definition of the transverse shear yield surface. If this parameter is omitted, the transverse shear yield surface is assumed not to depend on any field variables but might still depend on temperature. See Material Data Definition for more information.

Data line to define the transverse shear yield surface

First line
  1. A τ . (Units of FL−2.)

  2. B τ . (Units of FL−2.)

  3. C τ .

  4. Temperature, θ .

  5. Etc., up to four field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than four)
  1. Fifth field variable.

  2. Etc., up to eight field variables per line.

Repeat this data line as often as necessary.