are available in the form of Tresca or Hosford yield surfaces with associated plastic
flow to model isotropic yield or in the form of Barlat yield surfaces with associated
plastic flow to model anisotropic yield;
are introduced through user-defined exponents and coefficients of nonquadratic stress
potential functions;
can be used with perfect plasticity or isotropic hardening behavior; and
can be used with progressive damage and failure models (About Damage and Failure for Ductile Metals) to
specify different damage initiation criteria and damage evolution laws that allow for the
progressive degradation of the material stiffness and the removal of elements from the
mesh.
Nonquadratic yield surfaces with associated plastic flow for classical metal plasticity
are available. You can specify the Tresca or Hosford yield surface for isotropic yield or
the Barlat yield surface for anisotropic yield.
Tresca Yield Surface
The Tresca yield potential for isotropic yielding takes the form
where is the uniaxial yield stress and , , and are the principal stresses.
Input File Usage
Use both of the following options:
PLASTIC (to specify the uniaxial yield stress, )POTENTIAL, TYPE=TRESCA
Hosford Yield Surface
The Hosford yield surface for isotropic yielding is a generalization of the Mises yield
surface (Mises Yield Surface). The Hosford stress potential function is
where is the uniaxial yield stress; , , and are the principal stresses; and is the exponent. When or goes to infinity, the Hosford yield function reduces to the Tresca yield
function. When or the Hosford yield function reduces to the Mises yield function.
Input File Usage
Use both of the following options:
PLASTIC (to specify the uniaxial yield stress, )POTENTIAL, TYPE=HOSFORD, POWER=
Barlat Yield Surface
The Barlat yield surface allows you to model complex anisotropic yielding behavior. The
plastic flow rule is defined below. Anisotropic yield with Barlat's potential is modeled
through the use of anisotropy coefficients that are defined with respect to a reference
yield stress, .
Both three-dimensional and plane-stress formulations are available. The three-dimensional
formulations include the Yld2004-18p potential function that contains 18 coefficients and
the Yld91 potential function that contains 6 coefficients. The Yld2000-2d potential
function uses a plane-stress formulation with 8 coefficients. Although designed for
plane-stress conditions, you can extend the Yld2000-2d potential function to full
three-dimensional stress states through simplified assumptions.
The anisotropy coefficients can be defined as constants or as tabular functions of
temperature and predefined field variables. You must use a local orientation to define the
direction of anisotropy (see Orientations).
Input File Usage
Use both of the following options to define the Barlat Yld2004-18p yield
surface:
Barlat's anisotropic yield potential is based on linear transformations of stress. The
stress potential function (Yld2004-18p) proposed by Barlat et
al. (2005) is
where is the exponent and , (=1, 2, 3) are principal values of stress tensors and , respectively.
The principal values of a stress tensor ( or ) are the roots of the characteristic equation
where the first, second, and third stress invariants are
The principal values are
where the deviatoric polar angle is
and the stress invariants are
The tensors and are defined by two linear transformations of the deviatoric stress :
where and are transformation tensors that contain anisotropy coefficients and the
tensor transforms the Cauchy stress, , to the deviatoric stress. The transformations can be expressed in matrix
form:
and
The 18 anisotropy coefficients , can be calibrated from experiments.
If and , the yield function reduces to the Hosford isotropic yield function. In
addition, when or , the Mises isotropic plasticity model is recovered.
The flow rule is
where, from the definition of above,
Barlat Plasticity (Yld91)
When the Barlat plasticity considers only one linear transformation (that is, ), the yield surface reduces to the Barlat Yld91 yield surface (Barlat et
al., 1991) as
where is the exponent; and , , and are principal values of the stress tensor .
The linear transformation is defined as
or expressed in matrix form,
The six anisotropy coefficients , , , , , and can be calibrated from experiments. If all six coefficients are set to
unity, the yield function reduces to the Hosford isotropic yield function. In addition,
when or , the Mises isotropic plasticity model is recovered.
Barlat Plasticity (Yld2000-2d)
The Barlat Yld2000-2d yield criterion (Barlat et.
al, 2000) is widely used to model the plastic anisotropy of sheet metals under
plane-stress conditions. The yield surface is defined as
where is the exponent; and and are principal values of the stress tensor and , respectively:
The tensors and are defined by two linear transformations of the stress :
and
The transformations can be expressed in matrix form:
and
The eight anisotropy coefficients () can be calibrated from experiments. If all eight coefficients are set
to unity, and the Mises isotropic plasticity model is recovered.
The Barlat Yld2000-2d yield criterion can be extended to three-dimensional stress states
with simplified assumptions (Dunand et.
al, 2012). In the extended formulation, the principal values of the stress tensor and are:
The transformations can be expressed in the following matrix form:
and
Progressive Damage and Failure
Nonquadratic yield can be used with the progressive damage and failure models, as discussed
in About Damage and Failure for Ductile Metals. The
capability allows for the specification of one or more damage initiation criteria, including
ductile, shear, forming limit diagram (FLD), forming limit
stress diagram (FLSD), and Müschenborn-Sonne forming limit
diagram (MSFLD) criteria. After damage initiation, the
material stiffness is degraded progressively according to the specified damage evolution
response. The model offers two failure choices, including the removal of elements from the
mesh because of tearing or ripping of the structure. The progressive damage models allow for
a smooth degradation of the material stiffness, making them suitable for both quasi-static
and dynamic situations.
Nonquadratic yield is available with three-dimensional solid elements, plane-strain
elements, plane-stress elements, shell elements, and membrane elements.
Equivalent plastic strain, where is the initial equivalent plastic strain (zero or user-specified;
see Initial Conditions).
YIELDS
Yield stress, .
YIELDPOT
Yield potential, .
References
Barlat, F., H. Aretz, J. W. Yoon, M. E. Karabin, J. C. Brem, and R. E. Dick, “Linear
Transformation-based Anisotropic Yield Functions,” International Journal of
Plasticity, vol. 21, pp. 1009–1039, 2005.
Barlat, F., D. J. Lege, and J. C. Brem, “A
Six-Component Yield Function for Anisotropic Materials,” International Journal of
Plasticity, vol. 7, pp. 693–712, 1991.
Barlat, F., J. C. Brem, J. W. Yoon, K. Chung, R. E. Dick, D. J. Lege, F. Pourboghrat, S. H. Choi, and E. Chu, “Plane Stress Yield Function for Aluminum Alloy Sheets—Part 1: Theory,” International Journal of Plasticity, vol. 19, pp. 1297–1319, 2003.
Dunand, M., A. P. Maertens, M. Luo, and D. Mohr, “Experiments and Modeling of Anisotropic Aluminum Extrusions under Multi-axial Loading – Part I: Plasticity,” International Journal of Plasticity, vol. 36, pp. 34–49, 2012.