About Damage and Failure for Ductile Metals

Abaqus/Standard and Abaqus/Explicit offer general capabilities to predict the onset of damage and model the progressive damage and failure of metals and other ductile materials. In the most general case this requires the specification of the following:

Although primarily intended for ductile metals, these capabilities can also be used with the permanent set model for rubberlike materials, the parallel rheological framework, and the paperboard plasticity model.

A summary of the general framework for progressive damage and failure in Abaqus is given in About Progressive Damage and Failure. This section provides an overview of the damage initiation criteria and damage evolution law for ductile metals. In addition, Abaqus/Explicit offers dynamic failure models that are suitable for high-strain-rate dynamic problems (Dynamic Failure Models).

This page discusses:

See Also
About Progressive Damage and Failure
Damage Initiation for Ductile Metals
Damage Evolution and Element Removal for Ductile Metals
In Other Guides
*DAMAGE INITIATION
*DAMAGE EVOLUTION
Defining damage

Products Abaqus/Standard Abaqus/Explicit Abaqus/CAE