*POTENTIAL

Define the stress potential of a yield/creep model.

This option is used to define the Hill stress potential for yield and to define nonquadratic yield surfaces. In Abaqus/Standard, it can also be used to define creep behavior.

When defining the Hill stress potential, this option can be used only as a suboption of the following options:

When this option is used to define a nonquadratic yield surface, it can be used only as a suboption of the PLASTIC, HARDENING=ISOTROPIC option or the PLASTIC, HARDENING=USER option.

This page discusses:

See Also
In Other Guides
Classical Metal Plasticity
Models for Metals Subjected to Cyclic Loading
Rate-Dependent Plasticity: Creep and Swelling
Hill Anisotropic Yield/Creep
Nonquadratic Yield
Two-Layer Viscoplasticity
Critical State (Clay) Plasticity Model
Crushable Foam Plasticity Models
Extended Drucker-Prager Models

Products Abaqus/Standard Abaqus/Explicit Abaqus/CAE

Type Model data

LevelModel

Abaqus/CAE Property module

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the stress potential coefficients in addition to temperature. If this parameter is omitted, it is assumed that the coefficients are constant or depend only on temperature. See Material Data Definition for more information.

POWER

This parameter can be used only in conjunction with TYPE=BARLAT, BARLAT2000, BARLAT91, or HOSFORD.

Set this parameter equal to the exponent in the potential function.

TYPE

This parameter is used to define the stress potential function.

Set TYPE=BARLAT to specify nonquadratic anisotropic yield using the Barlat Yld2004-18p stress potential.

Set TYPE=BARLAT2000 to specify nonquadratic anisotropic yield using the Barlat Yld2000-2d stress potential.

Set TYPE=BARLAT91 to specify nonquadratic anisotropic yield using the Barlat Yld91 stress potential.

Set TYPE=HILL (default) to specify quadratic anisotropic yield using the Hill stress potential.

Set TYPE=HOSFORD to specify nonquadratic isotropic yield using the Hosford criterion.

Set TYPE=TRESCA to specify nonquadratic isotropic yield using the Tresca criterion.

Data lines used to define stress ratios for the Hill stress potential (TYPE=HILL)

First line
  1. R 11 .

  2. R 22 .

  3. R 33 .

  4. R 12 .

  5. R 13 .

  6. R 23 .

  7. Temperature.

  8. First field variable.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than one)
  1. Second field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of R i ⁢ j on temperature and other field variables.

Data lines used to define coefficients for the Barlat Yld2004-18p stress potential (TYPE=BARLAT)

First line
  1. c 1122 ′ .

  2. c 1133 ′ .

  3. c 2211 ′ .

  4. c 2233 ′ .

  5. c 3311 ′ .

  6. c 3322 ′ .

  7. c 1212 ′ .

  8. c 1313 ′ .

Second line
  1. c 2323 ′ .

  2. c 1122 " .

  3. c 1133 " .

  4. c 2211 " .

  5. c 2233 " .

  6. c 3311 " .

  7. c 3322 " .

  8. c 1212 " .

Third line
  1. c 1313 " .

  2. c 2323 " .

  3. Temperature.

  4. First field variable.

  5. Second field variable.

  6. Etc., up to five field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five)
  1. Sixth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of c i j k l ′ and c i j k l " on temperature and other field variables.

Data lines used to define coefficients for the Barlat Yld2000-2d stress potential (TYPE=BARLAT2000)

First line
  1. α 1 .

  2. α 2 .

  3. α 3 .

  4. α 4 .

  5. α 5 .

  6. α 6 .

  7. α 7 .

  8. α 8 .

Second line (leave blank if no temperature or field variables are specified)
  1. Temperature.

  2. First field variable.

  3. Etc., up to seven field variables per line.

Repeat this set of data lines as often as necessary to define the material constants as a function of temperature and other predefined field variables.

Data lines used to define coefficients for the Barlat Yld91 stress potential (TYPE=BARLAT91)

First line
  1. a ¯ .

  2. b ¯ .

  3. c ¯ .

  4. f ¯ .

  5. g ¯ .

  6. h ¯ .

  7. Temperature.

  8. First field variable.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than one)
  1. Second field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of a ¯ , b ¯ , c ¯ , f ¯ , g ¯ , and h ¯ on temperature and other field variables.

There are no data lines associated with the Hosford stress potential (TYPE=HOSFORD) or the Tresca stress potential (TYPE=TRESCA)