Principal axis
Select one of the three principal axes with which the datum axis must be colinear, as
shown in Figure 1 . For detailed instructions, see Creating a datum axis along a principal axis .
Figure 1. Defining a datum axis as one of the three principal axes.
Intersection of 2 planes
Select two non-parallel planar surfaces. Abaqus/CAE creates the datum axis where the two planes (or extensions of the two planes)
intersect, as shown in Figure 2 . For
detailed instructions, see Creating a datum axis along the intersection of two planes .
Figure 2. Defining a datum axis as the intersection of two planes.
Straight edge
Select a straight edge on the model with which the datum axis must be colinear, as
shown in Figure 3 . For detailed instructions, see Creating a datum axis along a straight edge .
Figure 3. Defining a datum axis as a straight edge on the model.
2 points
Select any two points on the model through which the datum axis must pass, as shown in
Figure 4 . For
detailed instructions, see Creating a datum axis through two points .
Figure 4. Defining a datum axis by selecting two points.
Axis of cylinder
Select a cylindrical face on the model. Abaqus/CAE creates a datum axis that lies along the axis of the cylindrical face, as shown in
Figure 5 .
For detailed instructions, see Creating a datum axis along the axis of a cylinder .
Figure 5. Defining a datum axis as the axis of a cylinder.
Normal to plane, thru point
Select a plane and a point that is not on the plane. Abaqus/CAE creates a datum axis that is normal to the plane and passes through the point, as
shown in Figure 6 . For detailed instructions, see Creating a datum axis normal to a plane and passing through a point .
Figure 6. Defining a datum axis by selecting a point and a plane.
Parallel to line, thru point
Select an edge of the model and a point outside the edge. Abaqus/CAE creates a datum axis that is parallel to the edge and passes through the point, as
shown in Figure 7 . For detailed instructions, see Creating a datum axis parallel to a line and passing through a point .
Figure 7. Defining a datum axis by selecting a point and an edge.
3 points on circle
Select three points on the model that define a circle. Abaqus/CAE creates a datum axis along the axis of the circle, as shown in Figure 8 . For
detailed instructions, see Creating a datum axis running along the axis of a circle defined by three points .
Figure 8. Defining a datum axis as the axis of a circle.
Rotate from line
Select an edge and an axis of rotation, and specify the angle through which the edge
will be rotated. Abaqus/CAE creates a datum axis by rotating the edge about the axis through the specified angle,
as shown in Figure 9 . For
detailed instructions, see Creating a datum axis by rotating an existing edge through a specified angle .
Figure 9. Defining a datum axis by rotating an edge through a specified angle.
Cross product of 2 lines
Select two non-parallel linear edges or datum axes on the model. Abaqus/CAE creates a datum axis orthogonal to the plane formed by both lines, as shown in Figure 10 . For detailed instructions, see Creating a datum axis by taking the cross product of two lines .
Figure 10. Defining a datum axis by selecting two lines.
Project line on plane
Select a linear edge or datum axis and a planar face or datum plane on the model. Abaqus/CAE creates a datum axis by projecting the line onto the plane, as shown in Figure 11 . For detailed instructions, see Creating a datum axis by projecting a line on a plane .
Figure 11. Defining a datum axis by projecting a line on a plane.