Creating a datum axis by projecting a line on a plane

You can position a datum axis by selecting a linear edge or datum axis, and a planar face or datum plane on the model. Abaqus/CAE creates the datum axis by projecting the line onto the plane.

See Also
Methods for creating a datum axis
Datum creation techniques
Controlling datum display

Context:

The figures below show examples of creating a datum axis by projecting a line on a plane.



  1. From the main menu bar, select Tools Datum .

    The Create Datum dialog box appears. The dialog box outlines the types of datum geometry you can create.

    Abaqus/CAE displays prompts in the prompt area to guide you through the procedure.

    Tip: You can also create a datum axis using the tool, located in the module toolbox. For a diagram of the datum tools in the toolbox, see Using the Datum toolset.

  2. From the list of types at the top of the dialog box, choose Axis.

    The Method list indicates the methods you can use to create a datum axis.

  3. From the Method list, select Project line on plane.
  4. If desired, select Make Independent from the prompt area to create the datum as an independent feature.
  5. From the part or assembly in the current viewport, select a linear edge or a datum axis.
  6. From the part or assembly in the current viewport, select a planer face or a datum plane.

    The datum axis appears. You cannot modify a datum axis created with this method; you must delete the old axis and create a new one.