Creating a datum axis by taking the cross product of two lines
You can position a datum axis by selecting two non-parallel linear edges or datum
axes on the model. Abaqus/CAE creates the datum axis orthogonal to the plane formed by both lines.
The figures below show examples of creating a datum axis by taking the cross product
of two lines.
From the main menu bar,
selectToolsDatum.
The Create Datum dialog box appears. The dialog box
outlines the types of datum geometry you can create.
Abaqus/CAE displays prompts
in the prompt area to guide you through the procedure.
Tip:
You can also create a datum axis using
the
tool, located in the module toolbox. For a diagram of the datum tools in the
toolbox, see Using the Datum toolset.
From the list of types at the top of the dialog box, choose
Axis.
The Method list indicates the methods you can use to
create a datum axis.
From the Method list, select Cross product of 2
lines.
If desired, select Make Independent from the prompt area
to create the datum as an independent feature.
From the part or assembly in the current viewport, select two edges or a datum
axes.
The datum axis appears. You cannot modify a datum axis created with this
method; you must delete the old axis and create a new one.