The following types of external conditions can be prescribed in an Abaqus model:
- Initial conditions
-
Nonzero initial conditions can be defined for many variables, as described in Initial Conditions.
- Boundary conditions
-
Boundary conditions are used to prescribe values of basic solution variables:
displacements and rotations in stress/displacement analysis, temperature in heat
transfer or coupled thermal-stress analysis, electrical potential in coupled
thermal-electrical analysis, pore pressure in soils analysis, acoustic pressure in
acoustic analysis, etc. Boundary conditions can be defined as described in Boundary Conditions.
- Loads
-
Many types of loading are available, depending on the analysis procedure. About Loads gives an overview of loading in Abaqus. Load types specific to one analysis procedure are
described in the appropriate procedure section in Analysis Procedures. General loads, which can be applied in multiple
analysis types, are described in:
- Prescribed assembly loads
-
Pre-tension sections can be defined in Abaqus/Standard to prescribe assembly loads in bolts or any other type of fastener. Pre-tension
sections are described in Prescribed Assembly Loads.
- Connector loads and motions
-
Connector elements can be used to define complex mechanical connections between parts,
including actuation with prescribed loads or motions. Connector elements are described
in About Connectors.
- Predefined fields
-
Predefined fields are time-dependent, non-solution-dependent fields that exist over the
spatial domain of the model. Temperature is the most commonly defined field. Predefined
fields are described in Predefined Fields.