*SUBMODEL TIME SYNCHRONIZATION

Specify the step and increment number (if needed) in the global model to provide how the time in the submodel synchronizes with the time in the global model.

This option is used to specify the step and increment number (if needed) in the global model to provide how the time in the submodel synchronizes with the time in the global model.

This page discusses:

See Also
In Other Guides
About Submodeling
General Submodeling

Products Abaqus/Standard

Type History data

LevelStep

Required parameters

GLOBAL STEP

Set this parameter equal to the step number in the global analysis from which the values of driving variables will be used to specify the values of the driving variables during this step of the submodel analysis.

Optional parameters

INC

This parameter can be used only in a static linear perturbation step.

Set this parameter equal to the increment in the selected step of the global model analysis from which the solution will be used to specify the values of the driven variables during this step of the submodel analysis. By default, the last increment in the selected step is chosen.

AMPLITUDE SCALE

Set this parameter equal to the value by which the driven variables read from the global analysis are to be scaled.

The default is AMPLITUDE SCALE=1.0.

TIME SCALE

If the global model step time differs from the submodel step time, set TIME SCALE=ON (default) to scale the global model step time to match the submodel step time.

Set TIME SCALE=OFF if time scaling should not be performed.

There are no data lines associated with this option.