*SUBMODEL CONDITIONS

Specify that submodel conditions are to be imposed on cut surfaces during this step.

This option is used together with instances of the SUBMODEL CUT option to impose submodel conditions on the cut surface of a submodel. Submodel conditions can be specified only once per step.

By default, all degrees of freedom for all cut surfaces are included. However, you can specify degrees of freedom to include or exclude for a cut surface.

This page discusses:

See Also
In Other Guides
About Submodeling
General Submodeling

Products Abaqus/Standard

Type History data

LevelStep

Optional parameters

OP

Set OP=MOD (default) to modify existing submodel conditions.

Set OP=NEW if all existing submodel conditions have to be removed.

Data lines to define the degrees of freedom to be included or excluded for cut surfaces

First line
  1. Name of the cut surface
  2. First degree of freedom
  3. Last degree of freedom
  4. Letter P to include these degrees of freedom, or letter N to exclude these degrees of freedom
  5. First degree of freedom
  6. Last degree of freedom
  7. Letter P to include these degrees of freedom, or letter N to exclude these degrees of freedom.
Second line (optional)
  1. Name of the cut surface
  2. First degree of freedom
  3. Last degree of freedom

Repeat the second data line as often as necessary.