Defining crack propagation criterion along initially partially bonded surfaces in Abaqus/Standard
Required parameters
-
DISTANCE
-
This parameter is required only if
TYPE=COD
or
TYPE=CRITICAL STRESS
is used.
If
TYPE=CRITICAL STRESS,
set this parameter equal to the distance along the potential crack surface ahead of
the crack tip at which the critical stress criterion is evaluated.
If
TYPE=COD,
set this parameter equal to the distance behind the crack tip along the secondary
surface at which the crack opening displacement is measured.
-
NSET
-
This parameter is required only if
TYPE=CRACK LENGTH.
Set this parameter equal to the name of the node set containing the nodes that are
used to define the reference point.
-
TYPE
-
Set
TYPE=CRITICAL STRESS
to use the critical stress criterion at a distance ahead of the crack tip as the
crack propagation criterion.
Set
TYPE=COD
to use the critical value of the crack opening displacement at a distance behind the
crack tip as the crack propagation criterion.
Set
TYPE=CRACK LENGTH
to specify the crack length as a function of time.
Set
TYPE=ENHANCED VCCT
to use the enhanced VCCT
(Virtual Crack Closure Technique) criterion in which the onset and growth of a crack
can be controlled by two different critical fracture energy release rates.
Set
TYPE=FATIGUE
to indicate that the onset and growth of the crack are characterized by the Paris
law, based upon the fracture energy release rate at the crack tip.
Set
TYPE=VCCT
to use the VCCT (Virtual Crack
Closure Technique) criterion as the crack propagation criterion. The
VCCT criterion uses the
principles of linear elastic fracture mechanics.
Set
TYPE=PRX-VCCT
to use the PRX-VCCT (Progressive
Release eXplicit - Virtual Crack Closure Technique) criterion as the crack
propagation criterion.
Set
TYPE=PRX-FATIGUE
to use the PRX-FATIGUE criterion
as the fatigue crack propagation criterion.
Optional parameters
-
DEPENDENCIES
-
This parameter is not relevant for
TYPE=CRACK LENGTH.
Set this parameter equal to the number of field variable dependencies included in
the data lines. If this parameter is omitted, it is assumed that the data are
constant or depend only on temperature. See Material Data Definition for more information.
-
LAMBDA
-
This parameter is relevant only for
TYPE=PRX-VCCT
and
TYPE=PRX-FATIGUE.
Set this parameter equal to the maximum increment in damage that is allowed within
each time increment. The default is
LAMBDA=0.1.
-
MIXED MODE BEHAVIOR
-
This parameter is relevant only for
TYPE=ENHANCED VCCT,
TYPE=FATIGUE,
TYPE=VCCT,
TYPE=PRX-VCCT,
or
TYPE=PRX-FATIGUE.
Set
MIXED MODE BEHAVIOR=BK
to specify the fracture energy as a function of the mode mix by means of the
Benzeggagh-Kenane mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=POWER
to specify the fracture energy as a function of the mode mix by means of a power law
mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=REEDER
to specify the fracture energy as a function of the mode mix by means of the
REEDER mixed mode fracture
criterion.
Set
MIXED MODE BEHAVIOR=TABULAR
to specify the crack growth criterion directly as a function of the total maximum
fracture energy release rate, mode mix ratio, and stress ratio in a mixed-mode
fatigue crack growth analysis. This option can be used only in conjunction with
TYPE=FATIGUE
or
TYPE=PRX-FATIGUE.
Set
MIXED MODE BEHAVIOR=USER
to specify a user-defined crack growth criterion in a mixed-mode fatigue crack
growth analysis using user subroutine UMIXMODEFATIGUE. This option
can be used only in conjunction with
TYPE=FATIGUE
or
TYPE=PRX-FATIGUE.
The default is
MIXED MODE BEHAVIOR=BK.
-
NODAL ENERGY RATE
-
This parameter is relevant only for
TYPE=FATIGUE,
TYPE=VCCT,
TYPE=PRX-VCCT,
or
TYPE=PRX-FATIGUE.
Include this parameter to indicate that the critical energy release rates should
not be read from the data lines but should be interpolated from the critical energy
release rates specified at the nodes with the NODAL ENERGY RATE option.
The exponents are still read from the data lines.
-
NPOLY
-
This parameter can be used only in conjunction with
POSITION=NONLOCAL.
It is used to specify the number of terms in the polynomial used for the moving
least-squares approximation.
Set
NPOLY=4
to use a linear polynomial approximation.
Set
NPOLY=7
(default) to use a quadratic polynomial approximation.
Set
NPOLY=10
to use a cubic polynomial approximation.
-
NPOWER
-
This parameter is relevant only for
TYPE=PRX-VCCT
and defines the rate of crack growth.
Set this parameter equal to a positive integer. The default is
NPOWER=10.
-
POSITION
-
This parameter is relevant for
TYPE=ENHANCED VCCT,
TYPE=FATIGUE,
TYPE=PRX-FATIGUE,
TYPE=PRX-VCCT,
or
TYPE=VCCT.
Set
POSITION=NONLOCAL
to use a moving least-squares approximation by polynomials to smooth out the
tangential directions of the individual crack segments along the crack front to
obtain a smoother pseudocrack tangential direction. This direction is used for
calculating energy release rates under mixed-mode loading.
-
PROPERTIES
-
This parameter can be used only in conjunction with
MIXED MODE BEHAVIOR=USER.
Set this parameter equal to the number of material constants being specified for a
user-defined crack growth criterion in a mixed-mode fatigue crack growth analysis.
The parameter value must be a nonzero value.
-
R CRACK DIRECTION
-
This parameter can be used only in conjunction with
POSITION=NONLOCAL.
Set this parameter equal to the radius around the crack tip within which the
elements along the crack front are included for smoothing out the tangential
directions of the individual crack segments along the crack front.
The default value is three times the typical element characteristic length along
the crack front in the model.
-
SYMMETRY
-
Include this parameter to compare the opening between the secondary surface and the
symmetry plane to half the COD
value specified. The SYMMETRY
parameter is relevant only for
TYPE=COD
when the user is using symmetry conditions to model the problem. In this case the
NORMAL parameter must be specified
on the INITIAL CONDITIONS option.
-
TOLERANCE
-
Set this parameter equal to the tolerance within which the crack propagation
criterion must be satisfied. The default is
TOLERANCE=0.1 for
TYPE=CRITICAL STRESS,
TYPE=COD,
and
TYPE=CRACK LENGTH.
For
TYPE=ENHANCED VCCT,
TYPE=PRX-VCCT,
and
TYPE=VCCT,
the default is TOLERANCE=0.2.
This parameter can also be used in a fatigue crack growth analysis
(TYPE=FATIGUE)
with gradual release of the debonding forces in debonding nodes when
DEBONDING FORCE=RAMP
is used on the DEBOND option. Set this
parameter equal to the tolerance within which the scalar damage parameter reaches
the value 1.0, resulting in the complete release of the debonding force. The default
is 0.05.
-
UNSTABLE GROWTH TOLERANCE
-
Set this parameter equal to the tolerance within which the unstable crack
propagation criterion must be satisfied for multiple nodes at and ahead of the crack
tip to be allowed to debond without the cut back of increment size in one increment
when the
TYPE=PRX-VCCT
or VCCT criterion is satisfied
for an unstable crack problem.
If this parameter is included without a specified value, the default value is
infinity.
-
VISCOSITY
-
This parameter can be used only in combination with
TYPE=ENHANCED VCCT
or
TYPE=VCCT.
Set this parameter equal to the value of the viscosity coefficient used in the
viscous regularization. The default value is 0.0.
Data lines to define the critical stress criterion
(TYPE=CRITICAL STRESS)
- First line
-
Normal failure stress,
.
Shear failure stress,
.
Shear failure stress,
. (Not applicable in two dimensions.)
Temperature.
First field variable.
Second field variable.
Etc., up to four field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than four)
-
Fifth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical stress criterion as a function of temperature and/or field
variables.
Data lines to define the crack opening displacement criterion
(TYPE=COD)
- First line
-
Critical crack opening displacement,
.
Cumulative crack length.
Temperature.
First field variable.
Second field variable.
Etc., up to five field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than five)
-
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
crack opening displacement criterion as a function of temperature and/or field
variables.
Data lines to define the crack length versus time criterion
(TYPE=CRACK LENGTH)
- First line
-
Total time (not step time).
Crack length, l, from the reference point.
Etc., up to four time/length pairs per line. Crack length must be given
as an increasing function of time.
Repeat this data line as often as necessary to define the crack
length as a function of time.
Data lines to define the onset and growth of a crack for the enhanced VCCT
criterion
(TYPE=ENHANCED VCCT)
for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Mode I critical energy release rate for onset of a crack,
.
Mode II critical energy release rate for onset of a crack,
.
Mode III critical energy release rate for onset of a crack,
.
Mode I critical energy release rate for crack propagation,
.
Mode II critical energy release rate for crack propagation,
.
Mode III critical energy release rate for crack propagation,
.
Exponent,
.
Temperature.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a nonzero
value)
-
First field variable.
Second field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponent as a function of temperature and field
variables.
Data lines to define the onset and growth of a crack for the enhanced VCCT
criterion
(TYPE=ENHANCED VCCT)
for
MIXED MODE BEHAVIOR=POWER
- First line
-
Mode I critical energy release rate for onset of a crack,
.
Mode II critical energy release rate for onset of a crack,
.
Mode III critical energy release rate for onset of a crack,
.
Mode I critical energy release rate for crack propagation,
.
Mode II critical energy release rate for crack propagation,
.
Mode III critical energy release rate for crack propagation,
.
Exponent,
.
Exponent,
.
- Second line
-
Exponent,
.
Temperature.
First field variable.
Second field variable.
Etc., up to six field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than six)
-
Seventh field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponents as a function of temperature and field
variables.
Data lines to define the fatigue crack onset and crack growth criterion
(TYPE=FATIGUE
or
TYPE=PRX-FATIGUE
criterion) for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Material constant for fatigue crack initiation,
. (Not used for
TYPE=PRX-FATIGUE.)
Material constant for fatigue crack initiation,
. (Not used for
TYPE=PRX-FATIGUE.)
Material constant for fatigue crack growth,
.
Material constant for fatigue crack growth,
.
Ratio of energy release rate threshold used in the Paris law over the
equivalent critical energy release rate,
.
Ratio of energy release rate upper limit used in the Paris law over the
equivalent critical energy release rate,
.
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
- Second line
-
Mode III critical energy release rate,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Etc. up to five field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than five)
-
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law, critical energy rates, and exponents as a function
of temperature and field variables.
Data lines to define the fatigue crack onset and crack growth criterion
(TYPE=FATIGUE
or
TYPE=PRX-FATIGUE
criterion) for
MIXED MODE BEHAVIOR=POWER
- First line
-
Material constant for fatigue crack initiation,
. (Not used for
TYPE=PRX-FATIGUE.)
Material constant for fatigue crack initiation,
. (Not used for
TYPE=PRX-FATIGUE.)
Material constant for fatigue crack growth,
.
Material constant for fatigue crack growth,
.
Ratio of energy release rate threshold used in the Paris law over the
equivalent critical energy release rate,
.
Ratio of energy release rate upper limit used in the Paris law over the
equivalent critical energy release rate,
.
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
- Second line
-
Mode III critical energy release rate,
.
Exponent,
.
Exponent,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law, the critical energy rates, and exponents as a
function of temperature and field variables.
Data lines to define fatigue crack growth criterion
(TYPE=FATIGUE
or
TYPE=PRX-FATIGUE
criterion) for
MIXED MODE BEHAVIOR=TABULAR
- First line
-
Crack growth rate,
in log scale.
Total maximum energy release rate,
in log scale.
Mode mix ratio,
.
Local stress ratio,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
crack growth rates as a function of energy release rate, mode mix ratio, local
stress ratio, temperature, and field variables.
Data lines to define fatigue crack growth criterion
(TYPE=FATIGUE
or
TYPE=PRX-FATIGUE
criterion) for
MIXED MODE BEHAVIOR=USER
- First line
-
Give the material constants, eight per line.
Repeat this data line as often as necessary to define all material
constants.
Data lines to define the VCCT criterion
(TYPE=VCCT)
or PRX-VCCT criterion
(TYPE=PRX-VCCT)
for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
Mode III critical energy release rate,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponent as a function of temperature and field
variables.
Data lines to define the VCCT criterion
(TYPE=VCCT)
or PRX-VCCT criterion
(TYPE=PRX-VCCT)
for
MIXED MODE BEHAVIOR=POWER
- First line
-
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
Mode III critical energy release rate,
.
Exponent,
.
Exponent,
.
Exponent,
.
Temperature.
First field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than one)
-
Second field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponents as a function of temperature and field
variables.
Defining crack propagation criterion along initially partially bonded surfaces in Abaqus/Explicit
Required parameters
-
TYPE
-
Set
TYPE=VCCT
to use the VCCT (Virtual Crack
Closure Technique) criterion as the crack propagation criterion. The
VCCT criterion uses the
principles of linear elastic fracture mechanics.
Optional parameters
-
DEPENDENCIES
-
Set this parameter equal to the number of field variable dependencies included in
the data lines. If this parameter is omitted, it is assumed that the data are
constant or depend only on temperature. See Material Data Definition for more information.
-
MIXED MODE BEHAVIOR
-
Set
MIXED MODE BEHAVIOR=BK
to specify the fracture energy as a function of the mode mix by means of the
Benzeggagh-Kenane mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=POWER
to specify the fracture energy as a function of the mode mix by means of a power law
mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=REEDER
to specify the fracture energy as a function of the mode mix by means of the
REEDER mixed mode fracture
criterion.
The default is
MIXED MODE BEHAVIOR=BK.
-
NODAL ENERGY RATE
-
Include this parameter to indicate that the critical energy release rates should
not be read from the data lines but should be interpolated from the critical energy
release rates specified at the nodes with the NODAL ENERGY RATE option.
The exponents are still read from the data lines.
Data lines to define the VCCT criterion
(TYPE=VCCT)
for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
Mode III critical energy release rate,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponent as a function of temperature and field
variables.
Data lines to define the VCCT criterion
(TYPE=VCCT)
for
MIXED MODE BEHAVIOR=POWER
- First line
-
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
Mode III critical energy release rate,
.
Exponent,
.
Exponent,
.
Exponent,
.
Temperature.
First field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than one)
-
Second field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponents as a function of temperature and field
variables.
Defining crack propagation criterion using the extended finite element method
(XFEM) in Abaqus/Standard
Required parameters
-
TYPE
-
Set
TYPE=ENHANCED VCCT
to use the enhanced VCCT
(Virtual Crack Closure Technique) criterion in which the onset and growth of a crack
can be controlled by two different critical fracture energy release rates.
Set
TYPE=FATIGUE
to indicate that the onset and fatigue crack growth are characterized by the
relative fracture energy release rate or the relative stress intensity factor at the
crack tip based on the Paris law.
Set
TYPE=VCCT
to use the VCCT (Virtual Crack
Closure Technique) criterion as the crack propagation criterion. The
VCCT criterion uses the
principles of linear elastic fracture mechanics.
Optional parameters
-
ANGLEMAX
-
Set this parameter equal to the maximum allowed change in the crack propagation
angle (in degrees) between the new crack propagation direction and the previous
crack propagation direction. The default is 85°.
-
DEPENDENCIES
-
Set this parameter equal to the number of field variable dependencies included in
the data lines. If this parameter is omitted, it is assumed that the data are
constant or depend only on temperature. See Material Data Definition for more information.
-
K-BASED
-
This parameter can be used only in conjunction with
MIXED MODE BEHAVIOR=TABULAR
or
MIXED MODE BEHAVIOR=USER.
Include this parameter to specify a fatigue crack growth criterion based on a
stress intensity factor rather than the fracture energy release rate.
-
MIXED MODE BEHAVIOR
-
Set
MIXED MODE BEHAVIOR=BK
to specify the fracture energy as a function of the mode mix by means of the
Benzeggagh-Kenane mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=IRWIN
to specify the effective stress intensity factor as a function of the mode mix by
means of the Irwin mixed-mode fracture criterion. This option can be used only in
conjunction with
TYPE=FATIGUE.
Set
MIXED MODE BEHAVIOR=POWER
to specify the fracture energy as a function of the mode mix by means of a power law
mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=REEDER
to specify the fracture energy as a function of the mode mix by means of the
REEDER mixed mode fracture
criterion.
Set
MIXED MODE BEHAVIOR=TABULAR
to specify the crack growth criterion directly as a function of the total maximum
fracture energy release rate, mode mix ratio, and stress ratio in a mixed-mode
fatigue crack growth analysis. This option can be used only in conjunction with
TYPE=FATIGUE.
Set
MIXED MODE BEHAVIOR=USER
to specify a user-defined crack growth criterion in a mixed-mode fatigue crack
growth analysis using user subroutine UMIXMODEFATIGUE. This option
can be used only in conjunction with
TYPE=FATIGUE.
The default is
MIXED MODE BEHAVIOR=BK.
-
NODAL ENERGY RATE
-
This parameter is relevant only for
TYPE=FATIGUE,
TYPE=VCCT.
Include this parameter to indicate that the critical energy release rates should
not be read from the data lines but should be interpolated from the critical energy
release rates specified at the nodes with the NODAL ENERGY RATE option.
The exponents are still read from the data lines.
-
NORMAL DIRECTION
-
Set
NORMAL DIRECTION=MTS
(default) to specify that the crack will propagate orthogonal to the direction of
the maximum tangential stress when the fracture criterion is satisfied.
Set
NORMAL DIRECTION=1
to specify that the crack will propagate orthogonal to the element local 1-direction
when the fracture criterion is satisfied.
Set
NORMAL DIRECTION=2
to specify that the crack will propagate orthogonal to the element local 2-direction
when the fracture criterion is satisfied.
-
NPOLY
-
This parameter can be used only in conjunction with
POSITION=NONLOCAL.
It is used to specify the number of terms in the polynomial used for the moving
least-squares approximation.
Set
NPOLY=4
to use a linear polynomial approximation.
Set
NPOLY=7
(default) to use a quadratic polynomial approximation.
Set
NPOLY=10
to use a cubic polynomial approximation.
-
POSITION
-
This parameter is relevant when
NORMAL DIRECTION=MTS.
Set
POSITION=NONLOCAL
to use a moving least-squares approximation by polynomials to smooth out the normals
of the individual crack facets in elements that satisfy the fracture criterion to
obtain the crack propagation direction along the crack front.
-
PROPERTIES
-
This parameter can be used only in conjunction with
MIXED MODE BEHAVIOR=USER.
Set this parameter equal to the number of material constants being specified for a
user-defined crack growth criterion in a mixed-mode fatigue crack growth analysis.
The parameter value must be a nonzero value.
-
R CRACK DIRECTION
-
This parameter can be used only in conjunction with
POSITION=NONLOCAL.
Set this parameter equal to the radius around the crack tip within which the
elements along the crack front are included for smoothing out the normals of the
individual crack facets to obtain the crack propagation direction.
The default value is three times the typical element characteristic length along
the crack front in the model.
-
TOLERANCE
-
Set this parameter equal to the tolerance within which the crack propagation
criterion must be satisfied. The default is
TOLERANCE=0.2 for
TYPE=ENHANCED VCCT,
and
TYPE=VCCT.
-
UNSTABLE GROWTH TOLERANCE
-
Set this parameter equal to the tolerance within which the unstable crack
propagation criterion must be satisfied for multiple nodes at and ahead of the crack
tip to be allowed to fracture without the cut back of increment size in one
increment when the
TYPE=VCCT
criterion is satisfied for an unstable crack problem.
If this parameter is included without a specified value, the default value is
infinity.
-
VISCOSITY
-
This parameter can be used only in combination with
TYPE=ENHANCED VCCT
or
TYPE=VCCT.
Set this parameter equal to the value of the viscosity coefficient used in the
viscous regularization. The default value is 0.0.
Data lines to define the onset and growth of a crack for the enhanced VCCT
criterion
(TYPE=ENHANCED VCCT)
for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Mode I critical energy release rate for onset of a crack,
.
Mode II critical energy release rate for onset of a crack,
.
Mode III critical energy release rate for onset of a crack,
.
Mode I critical energy release rate for crack propagation,
.
Mode II critical energy release rate for crack propagation,
.
Mode III critical energy release rate for crack propagation,
.
Exponent,
.
Temperature.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a nonzero
value)
-
First field variable.
Second field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponent as a function of temperature and field
variables.
Data lines to define the onset and growth of a crack for the enhanced VCCT
criterion
(TYPE=ENHANCED VCCT)
for
MIXED MODE BEHAVIOR=POWER
- First line
-
Mode I critical energy release rate for onset of a crack,
.
Mode II critical energy release rate for onset of a crack,
.
Mode III critical energy release rate for onset of a crack,
.
Mode I critical energy release rate for crack propagation,
.
Mode II critical energy release rate for crack propagation,
.
Mode III critical energy release rate for crack propagation,
.
Exponent,
.
Exponent,
.
- Second line
-
Exponent,
.
Temperature.
First field variable.
Second field variable.
Etc., up to six field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than six)
-
Seventh field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponents as a function of temperature and field
variables.
Data lines to define the fatigue crack onset and crack growth criterion
(TYPE=FATIGUE)
for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack growth,
.
Material constant for fatigue crack growth,
.
Ratio of energy release rate threshold used in the Paris law over the
equivalent critical energy release rate,
.
Ratio of energy release rate upper limit used in the Paris law over the
equivalent critical energy release rate,
.
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
- Second line
-
Mode III critical energy release rate,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Etc. up to five field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than five)
-
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law, critical energy rates, and exponents as a function
of temperature and field variables.
Data lines to define the fatigue crack onset and crack growth criterion
(TYPE=FATIGUE)
for
MIXED MODE BEHAVIOR=POWER
- First line
-
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack growth,
.
Material constant for fatigue crack growth,
.
Ratio of energy release rate threshold used in the Paris law over the
equivalent critical energy release rate,
.
Ratio of energy release rate upper limit used in the Paris law over the
equivalent critical energy release rate,
.
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
- Second line
-
Mode III critical energy release rate,
.
Exponent,
.
Exponent,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law, the critical energy rates, and exponents as a
function of temperature and field variables.
Data lines to define fatigue crack growth criterion
(TYPE=FATIGUE)
for
MIXED MODE BEHAVIOR=IRWIN
- First line
-
Material constant,
, for fatigue crack growth based on
.
Material constant,
, for fatigue crack growth based on
.
Ratio of equivalent stress intensity factor threshold used in the Paris
law over the equivalent critical stress intensity factor,
. The default is 0.01.
Ratio of equivalent stress intensity factor upper limit used in the
Paris law over the equivalent critical stress intensity factor,
. The default is 0.85.
Equivalent critical stress intensity factor,
.
Constant coefficient,
, defined in
.
Constant coefficient,
, defined in
.
Constant coefficient,
, defined in
.
- Second line (leave blank if no temperature or field variables are
specified)
-
Temperature.
First field variable.
Second field variable.
Etc., up to seven field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than seven)
-
Eighth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law and the critical stress intensity factor as a
function of temperature and field variables.
Data lines to define fatigue crack growth criterion
(TYPE=FATIGUE)
for
MIXED MODE BEHAVIOR=TABULAR
- First line
-
Crack growth rate,
in log scale.
Total maximum energy release rate,
in log scale.
Mode mix ratio,
.
Local stress ratio,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
crack growth rates as a function of energy release rate, mode mix ratio, local
stress ratio, temperature, and field variables.
Data lines to define fatigue crack growth criterion
(TYPE=FATIGUE)
for
MIXED MODE BEHAVIOR=TABULAR,
K-BASED
- First line
-
- Constant coefficient,
, defined in
.
- Constant coefficient,
, defined in
.
- Constant coefficient,
, defined in
.
- Second line
-
Crack growth rate,
, in log scale.
Effective stress intensity factor range of a load cycle,
, in log scale.
Mode mix ratio,
.
Local stress ratio,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines (exclude the first line) as often as
necessary to define the crack growth rates as a function of the effective stress
intensity factor range, mode mix ratio, local stress ratio, temperature, and field
variables.
Data lines to define fatigue crack growth criterion
(TYPE=FATIGUE)
for
MIXED MODE BEHAVIOR=USER
- First line
-
Give the material constants, eight per line.
Repeat this data line as often as necessary to define all material
constants.
Data lines to define the VCCT criterion
(TYPE=VCCT)
for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
Mode III critical energy release rate,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponent as a function of temperature and field
variables.
Data lines to define the VCCT criterion
(TYPE=VCCT)
for
MIXED MODE BEHAVIOR=POWER
- First line
-
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
Mode III critical energy release rate,
.
Exponent,
.
Exponent,
.
Exponent,
.
Temperature.
First field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than one)
-
Second field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
critical energy rates and exponents as a function of temperature and field
variables.
Defining fatigue crack propagation criterion with adaptive remeshing technique in Abaqus/Standard
Required parameters
-
TYPE
-
Set
TYPE=FATIGUE
to indicate that the onset and fatigue crack growth are characterized by the
relative fracture energy release rate or the relative stress intensity factor at the
crack tip based on the Paris law.
Optional parameters
-
DEPENDENCIES
-
Set this parameter equal to the number of field variable dependencies included in
the data lines. If this parameter is omitted, it is assumed that the data are
constant or depend only on temperature. See Material Data Definition for more information.
-
K-BASED
-
This parameter can be used only in conjunction with
MIXED MODE BEHAVIOR=TABULAR
or
MIXED MODE BEHAVIOR=USER.
Include this parameter to specify a fatigue crack growth criterion based on a
stress intensity factor rather than the fracture energy release rate.
-
MIXED MODE BEHAVIOR
-
Set
MIXED MODE BEHAVIOR=BK
to specify the fracture energy as a function of the mode mix by means of the
Benzeggagh-Kenane mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=IRWIN
to specify the effective stress intensity factor as a function of the mode mix by
means of the Irwin mixed-mode fracture criterion.
Set
MIXED MODE BEHAVIOR=POWER
to specify the fracture energy as a function of the mode mix by means of a power law
mixed mode fracture criterion.
Set
MIXED MODE BEHAVIOR=REEDER
to specify the fracture energy as a function of the mode mix by means of the
REEDER mixed mode fracture
criterion.
Set
MIXED MODE BEHAVIOR=TABULAR
to specify the crack growth criterion directly as a function of the total maximum
fracture energy release rate, mode mix ratio, and stress ratio in a mixed-mode
fatigue crack growth analysis.
Set
MIXED MODE BEHAVIOR=USER
to specify a user-defined crack growth criterion in a mixed-mode fatigue crack
growth analysis using user subroutine UMIXMODEFATIGUE. This option
can be used only in conjunction with
TYPE=FATIGUE.
The default is
MIXED MODE BEHAVIOR=BK.
-
NORMAL DIRECTION
-
Set
NORMAL DIRECTION=MTS
(default) to specify that the crack will propagate orthogonal to the direction of
the maximum tangential stress when the fracture criterion is satisfied.
Set
NORMAL DIRECTION=1
to specify that the crack will propagate orthogonal to the element local 1-direction
when the fracture criterion is satisfied.
Set
NORMAL DIRECTION=2
to specify that the crack will propagate orthogonal to the element local 2-direction
when the fracture criterion is satisfied.
-
PROPERTIES
-
This parameter can be used only in conjunction with
MIXED MODE BEHAVIOR=USER.
Set this parameter equal to the number of material constants being specified for a
user-defined crack growth criterion in a mixed-mode fatigue crack growth analysis.
The parameter value must be a nonzero value.
Data lines to define the fatigue crack onset and crack growth criterion for
MIXED MODE BEHAVIOR=BK
or REEDER
- First line
-
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack growth,
.
Material constant for fatigue crack growth,
.
Ratio of energy release rate threshold used in the Paris law over the
equivalent critical energy release rate,
.
Ratio of energy release rate upper limit used in the Paris law over the
equivalent critical energy release rate,
.
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
- Second line
-
Mode III critical energy release rate,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Etc. up to five field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than five)
-
Sixth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law, critical energy rates, and exponents as a function
of temperature and field variables.
Data lines to define the fatigue crack onset and crack growth criterion for
MIXED MODE BEHAVIOR=POWER
- First line
-
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack initiation,
.
Material constant for fatigue crack growth,
.
Material constant for fatigue crack growth,
.
Ratio of energy release rate threshold used in the Paris law over the
equivalent critical energy release rate,
.
Ratio of energy release rate upper limit used in the Paris law over the
equivalent critical energy release rate,
.
Mode I critical energy release rate,
.
Mode II critical energy release rate,
.
- Second line
-
Mode III critical energy release rate,
.
Exponent,
.
Exponent,
.
Exponent,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law, the critical energy rates, and exponents as a
function of temperature and field variables.
Data lines to define fatigue crack growth criterion for
MIXED MODE BEHAVIOR=IRWIN
- First line
-
Material constant,
, for fatigue crack growth based on
.
Material constant,
, for fatigue crack growth based on
.
Ratio of equivalent stress intensity factor threshold used in the Paris
law over the equivalent critical stress intensity factor,
. The default is 0.01.
Ratio of equivalent stress intensity factor upper limit used in the
Paris law over the equivalent critical stress intensity factor,
. The default is 0.85.
Equivalent critical stress intensity factor,
.
Constant coefficient,
, defined in
.
Constant coefficient,
, defined in
.
Constant coefficient,
, defined in
.
- Second line (leave blank if no temperature or field variables are
specified)
-
Temperature.
First field variable.
Second field variable.
Etc., up to seven field variables.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than seven)
-
Eighth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
constants used in the Paris law and the critical stress intensity factor as a
function of temperature and field variables.
Data lines to define fatigue crack growth criterion for
MIXED MODE BEHAVIOR=TABULAR
- First line
-
Crack growth rate,
in log scale.
Total maximum energy release rate,
in log scale.
Mode mix ratio,
.
Local stress ratio,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the
crack growth rates as a function of energy release rate, mode mix ratio, local
stress ratio, temperature, and field variables.
Data lines to define fatigue crack growth criterion for
MIXED MODE BEHAVIOR=TABULAR,
K-BASED
- First line
-
- Constant coefficient,
, defined in
.
- Constant coefficient,
, defined in
.
- Constant coefficient,
, defined in
.
- Second line
-
Crack growth rate,
, in log scale.
Effective stress intensity factor range of a load cycle,
, in log scale.
Mode mix ratio,
.
Local stress ratio,
.
Temperature.
First field variable.
Second field variable.
Third field variable.
- Subsequent lines (only needed if the
DEPENDENCIES parameter has a value
greater than three)
-
Fourth field variable.
Etc., up to eight field variables per line.
Repeat this set of data lines (exclude the first line) as often as
necessary to define the crack growth rates as a function of the effective stress
intensity factor range, mode mix ratio, local stress ratio, temperature, and field
variables.
Data lines to define fatigue crack growth criterion for
MIXED MODE BEHAVIOR=USER
- First line
-
Give the material constants, eight per line.
Repeat this data line as often as necessary to define all material
constants.
|