Selecting an Adaptivity Technique
Four adaptivity techniques are available in Abaqus: Arbitrary Lagrangian-Eulerian (ALE) adaptive meshing; varying topology adaptive remeshing; mesh-to-mesh solution mapping, to enable rezoning analysis; and fatigue crack growth with adaptive remeshing. Table 1 shows that the adaptivity techniques can be classified according to
-
their applicability to achieving particular goals, either accuracy or control of mesh distortion;
-
their impact on mesh definitions, either through smoothing a single mesh or through generating multiple dissimilar meshes; and
-
when adaptivity occurs with respect to analysis steps.
| Accuracy | Distortion control | Single mesh | Multiple meshes | Adaptivity occurs | |
|---|---|---|---|---|---|
| ALE adaptive meshing | Throughout a step | ||||
| Adaptive remeshing | Separately from analysis steps | ||||
| Mesh-to-mesh solution mapping | Between analysis steps | ||||
| Fatigue crack growth with adaptive remeshing | Separately from analysis steps |
ALE Adaptive Meshing
Arbitrary Lagrangian-Eulerian (ALE) adaptive meshing provides control of mesh distortion. ALE adaptive meshing uses a single mesh definition that is gradually smoothed within analysis steps. ALE adaptive meshing is available for limited applications in Abaqus/Standard and is more generally applicable in Abaqus/Explicit. The term ALE implies a broad range of analysis approaches, from purely Lagrangian analysis, in which the node motion corresponds to material motion, to purely Eulerian analysis, in which the nodes remain fixed in space and material “flows” through the elements. Typically ALE analyses use an approach between these two extremes. The ALE feature is distinct from the Eulerian analysis capability in Abaqus/Explicit, which is described in Eulerian Analysis.
You can use adaptive meshing to control element distortion in cases where large deformation or loss of material occurs. Figure 1 illustrates a case where adaptive meshing limits mesh distortion in a bulk forming simulation.

Unlike other adaptivity techniques, adaptive meshing operates on your original mesh definition and is, therefore, useful only when a single mesh can be effective for the duration of a simulation. The mesh is adapted through smoothing of the mesh nodes. This smoothing is typically applied frequently within analysis steps. ALE adaptive meshing requires only one analysis job. See About ALE Adaptive Meshing for details.
Adaptive Remeshing (Varying Topology Adaptivity)
Adaptive remeshing is typically used for accuracy control, although it can also be used for distortion control in some situations. The adaptive remeshing process involves the iterative generation of multiple dissimilar meshes to determine a single, optimized mesh that is used throughout an analysis. Adaptive remeshing is available only for Abaqus/Standard analyses submitted from Abaqus/CAE. The goal of adaptive remeshing is to obtain a solution that satisfies mesh discretization error indicator targets that you set, while minimizing the number of elements and, hence, the cost of your analysis. You can use adaptive remeshing to obtain a mesh that provides a balance between solution cost and desired accuracy. Figure 2 illustrates a case where adaptive remeshing improves the quality of the stress result around a fillet with targeted mesh refinement.

Adaptive remeshing involves an iterative process to determine a single, optimized mesh that is used through an analysis. The iterative process and the remeshing are controlled in Abaqus/CAE. Each successive analysis job covers the same simulation history time period but uses a different mesh. Once the adaptive remeshing process is complete, a single mesh and a single analysis job represent your entire analysis history. See About Adaptive Remeshing and Understanding adaptive remeshing.
Mesh-to-Mesh Solution Mapping
Mesh-to-mesh solution mapping is available only in Abaqus/Standard. You can use this technique to control element distortion in cases where large deformation occurs by replacing the mesh and continuing the analysis. Figure 3 illustrates a case where solution mapping is used in conjunction with a new mesh to overcome difficulties associated with element distortion.

Mesh replacement, or rezoning, involves the creation of multiple Abaqus jobs, each of which represents the configuration of the model in distinct, sequential periods of the simulation history. You use mesh replacement when a single mesh cannot be effective for the duration of a simulation. Each mesh subsequent to the initial configuration reflects a solution-dependent deformed configuration of the model. Therefore, analyses that use mesh replacement are sequentially dependent, and Abaqus uses mesh-to-mesh solution mapping to propagate solution variables from one analysis to the next. In contrast to adaptive remeshing, each mesh replacement job represents a component of the overall analysis history—no single mesh and no single analysis job represent your entire analysis. See Mesh-to-Mesh Solution Mapping for details.
Fatigue Crack Growth with Adaptive Remeshing
Fatigue crack growth with adaptive remeshing is based on Abaqus fracture/fatigue technology in conjunction with tetrahedral element–based adaptive remeshing technology. It is available only in Abaqus/Standard.
Abaqus/Standard calculates the stress intensity factors based on the conventional contour integral method (Contour Integral Evaluation). The crack growth is governed by either the stress intensity factor or the strain energy release rate–based Paris’ law (Linear Elastic Fatigue Crack Growth Analysis). The tetrahedral element–based adaptive remeshing technology is used to create a new mesh after each increment of crack growth, such that the new mesh conforms with the updated crack front. The overall fatigue workflow is semi-automated and involves automatic execution (with no user intervention) of a series of successive Abaqus analyses with progressively longer crack lengths. No state mapping is performed or necessary between two successive Abaqus analyses. Figure 4 illustrates a case where adaptive remeshing is used to create a new mesh that conforms with the updated crack front after crack propagation. For more information on defining fracture onset and growth criteria, controlling the incremental crack growth, and adaptive remeshing, see Fatigue Crack Propagation with Adaptive Remeshing.
