*SHEAR RETENTION

Define the reduction of the shear modulus associated with crack surfaces in a CONCRETE model as a function of the tensile strain across the crack.

This option is used to give a multiplying factor, ϱ, that defines the modulus for shearing of cracks as a fraction of the elastic shear modulus of the uncracked concrete. If this option is used, it should follow the CONCRETE option. The SHEAR RETENTION option can also be used in conjunction with the FAILURE RATIOS option.

This page discusses:

See Also
*CONCRETE
*FAILURE RATIOS
In Other Guides
Concrete Smeared Cracking

ProductsAbaqus/StandardAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of shear retention behavior, in addition to temperature. If this parameter is omitted, it is assumed that the shear retention behavior depends only on temperature. See Material Data Definition for more information.

Data lines to define the shear retention behavior

First line

  1. ϱclose. The default is 1.0.

  2. εmax. The default is a very large number (full shear retention).

  3. Not used.

  4. Not used.

  5. Temperature.

  6. First field variable.

  7. Second field variable.

  8. Third field variable.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than three)

  1. Fourth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the shear retention behavior on temperature and other predefined field variables.