*FAILURE RATIOS

Define the shape of the failure surface for a CONCRETE model.

This option is used to define the shape of the failure surface for a concrete model. If used, it must appear after the CONCRETE option. The FAILURE RATIOS option can also be used with the TENSION STIFFENING and SHEAR RETENTION options.

This page discusses:

See Also
*CONCRETE
*TENSION STIFFENING
*SHEAR RETENTION
In Other Guides
Concrete Smeared Cracking

ProductsAbaqus/StandardAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the failure ratios, in addition to temperature. If this parameter is omitted, it is assumed that the failure ratios depend only on temperature. See Material Data Definition for more information.

Data lines to define the failure surface for a concrete model

First line

  1. Ratio of the ultimate biaxial compressive stress to the uniaxial compressive ultimate stress. Default is 1.16.

  2. Absolute value of the ratio of uniaxial tensile stress at failure to the uniaxial compressive stress at failure. Default is 0.09.

  3. Ratio of the magnitude of a principal component of plastic strain at ultimate stress in biaxial compression to the plastic strain at ultimate stress in uniaxial compression. Default is 1.28.

  4. Ratio of the tensile principal stress value at cracking in plane stress, when the other nonzero principal stress component is at the ultimate compressive stress value, to the tensile cracking stress under uniaxial tension. Default is 1/3.

  5. Temperature.

  6. First field variable.

  7. Second field variable.

  8. Third field variable.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than three)

  1. Fourth field variable.

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of the failure ratios on temperature and other predefined field variables.