*POROUS METAL PLASTICITY

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

Optional parameters

DEPENDENCIES: Set this parameter equal to the number of field variable dependencies, in addition to temperature, included in the definition of the $q_{1}$ , $q_{2}$ , and $q_{3}$ parameters. If this parameter is omitted, $q_{1}$ , $q_{2}$ , and $q_{3}$ may depend only on temperature. See Material Data Definition for more information.
RELATIVE DENSITY: Set this parameter equal to $r_{0}$ , the initial relative density of the material. If this parameter is omitted, the initial relative density is interpolated from the values given in the INITIAL CONDITIONS, TYPE=RELATIVE DENSITY option.

Data lines to define porous metal plasticity

First line

$q_{1}$ .
$q_{2}$ .
$q_{3}$ .
Temperature.
First field variable.
Second field variable.
Etc., up to four field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than four)

Fifth field variable.
Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the dependence of $q_{1}$ , $q_{2}$ , and $q_{3}$ on temperature and other predefined field variables.