ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE
TypeHistory data
LevelStep
Abaqus/CAEStep module
One of the following mutually exclusive parameters is required when the INTEGRATED OUTPUT option is used in an
Abaqus/Explicit
analysis
- SECTION
-
Set this parameter equal to the name of the
INTEGRATED OUTPUT SECTION (see
Integrated Output Section Definition)
over which this output request is being made.
- SURFACE
-
Set this parameter equal to the name of the surface (see
Element-Based Surface Definition)
over which this output request is being made.
- ELSET
-
Set this parameter equal to the name of the element set over which this
output request is being made.
Optional parameters
- VARIABLE
-
Set VARIABLE=ALL to indicate that all integrated output variables applicable to
this procedure should be written to the output database.
Set VARIABLE=PRESELECT to indicate that the default integrated output variables for
the current procedure type should be written to the output database. Additional
output variables can be requested on the data lines.
If this parameter is omitted, the integrated output variables for output
must be specified on the data line.