*IMPEDANCE PROPERTY

Define the impedance parameters for an acoustic medium boundary.

This option is used to define the proportionality factors between the pressure and the normal components of surface displacement and velocity in acoustic analysis. The IMPEDANCE PROPERTY option must be used in conjunction with the IMPEDANCE or SIMPEDANCE option.

This page discusses:

See Also
*IMPEDANCE
*SIMPEDANCE
In Other Guides
Acoustic and Shock Loads

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEInteraction module

Required parameters

NAME

Set this parameter equal to a label that will be used to refer to the impedance property on the IMPEDANCE or SIMPEDANCE option.

Optional parameters

DATA

Set DATA=ADMITTANCE (default) to specify an impedance using a table of admittance values.

Set DATA=IMPEDANCE to specify an impedance using a table of real and imaginary parts of the impedance.

INPUT

Set this parameter equal to the name of the alternate input file containing the data lines for this option. See Input Syntax Rules for the syntax of such file names. If this parameter is omitted, it is assumed that the data follow the keyword line.

Data lines to define an impedance using DATA=ADMITTANCE (default)

First line

  1. 1/k1, the proportionality factor between pressure and displacement of the surface in the normal direction. This quantity is the imaginary part of the complex admittance, divided by the angular frequency; see Acoustic and Shock Loads. (Units of F−1L3.)

  2. 1/c1, the proportionality factor between pressure and velocity of the surface in the normal direction. This quantity is the real part of the complex admittance. (Units of F−1L3T−1.)

  3. Frequency. (Cycles/time.) Frequency dependence is active only during frequency domain analysis in Abaqus/Standard.

Repeat this data line as often as necessary in Abaqus/Standard to describe the variation of the coefficients with frequency. Only the first line entered will be used in direct-integration procedures.

Data lines to define an impedance using DATA=IMPEDANCE

First line

  1. Re⁢(Z), the real part of the surface impedance. (Units of F L−3T.)

  2. Im⁢(Z), the imaginary part of the surface impedance. (Units of F L−3T.)

  3. Frequency. (Cycles/time.) Frequency dependence is active only during frequency domain analysis in Abaqus/Standard.

Repeat this data line as often as necessary in Abaqus/Standard to describe the variation of the coefficients with frequency. Only the first line entered will be used in direct-integration procedures.