-
S: All stress components.
-
SP: All principal stresses.
-
MISES: Mises equivalent stress.
-
PRESS: Equivalent pressure stress.
-
TRIAX: Stress triaxiality.
-
LODE: Lode angle term.
-
LE: All logarithmic strain
components.
-
LEP: All principal logarithmic
strains.
-
ER: All logarithmic strain rate
components.
-
ERP: All principal logarithmic strain
rates.
-
THE: All thermal strain components.
-
PE: All plastic strain components.
-
PEP: All principal plastic strains.
-
PEEQ: Equivalent plastic strain.
-
PEEQR: Equivalent plastic strain
rate.
-
PEEQT: Equivalent plastic strain in
uniaxial tension, defined as
.
-
PEEQTSHR: Equivalent plastic strain
for paperboard out-of-plane plasticity. Available only for the paperboard material
model.
-
PEQC: All equivalent plastic strains
for models that have more than one yield/failure surface.
-
PBCAP: The cap position for the cap
plasticity model.
-
CE: All creep strain components.
-
CEP: All principal creep strains.
-
CEEQ: Equivalent creep strain.
-
CEEQNET: The equivalent creep strain
in all the networks. Available only for the parallel rheological framework.
-
CEEQSSNET: Accumulated steady-state
equivalent creep strain in all the networks that use the modified Darveaux creep law.
Available only for the parallel rheological framework.
-
SDEFRESNET: Deformation resistance in
all the networks that use the Anand creep law. Available only for the parallel
rheological framework.
-
EEQUT: Equivalent uniaxial tensile
total strain. Available only for the superelasticity model.
-
MVF: Fraction of martensite.
Available only for the superelasticity model.
-
SEQUT: Equivalent uniaxial tensile
total stress. Available only for the superelasticity model.
-
TE: All transformation strain
components. Available only for the superelasticity model.
-
TEEQ: Equivalent transformation
strain. Available only for the superelasticity model.
-
ALPHA: All total kinematic hardening
shift tensor components.
-
ALPHAP: All principal values of total
kinematic hardening shift tensor.
-
TEMP: Temperature.
-
SDEG: Scalar stiffness degradation
variable.
-
DUCTCRT: Ductile damage initiation
criterion.
-
JCCRT: Johnson-Cook damage initiation
criterion.
-
HCCRT: Hosford-Coulomb damage
initiation criterion.
-
SHRCRT: Shear damage initiation
criterion.
-
FLDCRT: Forming limit diagram
(FLD) damage initiation criterion.
-
FLSDCRT: Forming limit stress diagram
(FLSD) damage initiation criterion.
-
MSFLDCRT: Müschenborn-Sonne forming
limit diagram (MSFLD) damage initiation criterion.
-
MKCRT: Marciniak-Kuczynski (M-K)
damage initiation criterion.
-
MSTRESSCRT: Maximum stress-based
damage initiation criterion.
-
MSTRAINCRT: Maximum strain-based
damage initiation criterion.
-
TSAIWUCRT: Stress-based Tsai-Wu
damage initiation criterion.
-
TSAIWUECRT: Strain-based Tsai-Wu
damage initiation criterion.
-
EREQ: Strain rate used to evaluate
strain-rate-dependent damage initiation criteria.
-
POR: Pore fluid pressure.
-
EVF: Volume fraction. Available only
for Eulerian elements.
-
RD: Relative density. Available only
for cap plasticity and porous metal plasticity.
-
VVF: Void volume fraction. Available
only for cap plasticity and porous metal plasticity.
-
UMULMAX: The maximum deviatoric
strain energy density for rubberlike materials. The maximum strain energy density for
elastomeric foams. Available only when the Mullins effect is modeled.
A requested output variable must be valid for the material model for the request to be
successful.