Formulation
The mechanical passive and active responses of cardiac tissue are described in detail below.
Mechanical Passive Tissue Response
The mechanical passive tissue response is given by the Holzapfel-Ogden anisotropic hyperelastic model (see Holzapfel-Ogden Form). The strain energy potential is given by
where is the strain energy per unit of reference volume; the indexes and ( , ) denote the fiber and sheet directions, which are assumed to be aligned with the local directions 1 and 2, respectively; and , , , , , , , , and are material parameters (see Holzapfel-Ogden Form for additional details). Unlike the native implementation of the Holzapfel-Ogden model, the cardiac fibers and sheets contribute to Equation 1 when they are in compression.
If the material is stretched significantly, the second and third exponential terms in the Holzapfel-Ogden strain energy potential might overflow numerically. To avoid this, the exponential terms can be linearized or approximated by polynomial functions when the stretch in the fiber direction reaches a certain value (see Linearization of Holzapfel-Ogden Strain Energy Potential for additional details). The value of the linearization stretch must be . If you do not specify the linearization stretch or set it to 0, the exponential terms in the strain energy potential are not linearized.
Mechanical Active Tissue Response
The active tissue response intends to capture the Frank-Starling effect; that is, the fact that the strength of the heart’s systolic contraction is directly proportional to its diastolic expansion. To do so, the active response accounts for the local changes of the sarcomere length, which affects the stress in the fiber and sheet directions.
Following the work of Guccione et al. (1993) and Walker et al. (2005), a time-varying elastance model defines the active stress in the cardiac fiber direction, , as
where stands for the activation indicator function defined in Equation 4 and is the deformed sarcomere length given by in terms of the stress-free sarcomere length, , and the component of the Lagrangian strain tensor aligned with the local fiber direction.The active stress is first activated at time when the activation field variable first reaches the electrical potential activation threshold, :
The time evolution of the active stress during the activation duration is governed by
with the duration to reach peak tension and a strain-dependent relaxation duration given bywith two model parameters and .Finally, the Hill equation that describes chemical equilibrium in Equation 2 is given by
in terms of , the peak intercellular calcium concentration and the strain-dependent calcium sensitivity given bywith the maximum intercellular calcium concentration, and the parameter that governs the shape of peak isometric tension-sarcomere length relation.Figure 1 shows a schematic for and , and Figure 2 shows a schematic for and .


Total Tissue Response
The passive and active tissue responses are combined to define the total tissue response. Specifically, the total stress in the fiber direction is given by
in terms of the passive stress in the fiber direction, , and the active stress in the fiber direction, . The total stress in the sheet direction, , is given by
in terms of the passive stress in the sheet direction, ; the active stress in the fiber direction, ; and , a scalar value less than 1.0 that represents the interaction between the adjacent muscle fibers. The value of affects the total contractility of the tissue and the degree of twist developed in the tissue during the cardiac cycle.
The 22 parameters that define the combined passive and active tissue responses are defined as follows:
- , , , , , , , ,
- are the material parameters for the Holzapfel-Ogden passive response in Equation 1,
- is the linearization stretch for the Holzapfel-Ogden passive response,
- is the maximum isometric tension level in Equation 2,
- is the electrical potential activation threshold in Equation 2,
- is the index for the activation field variable ,
- is the sarcomere length below which there is no activation in Equation 2,
- is the stress-free sarcomere length in Equation 3,
- is the peak intercellular calcium concentration in Equation 7,
- is the maximum intercellular calcium concentration in Equation 8,
- is the parameter that governs the shape of peak isometric tension-sarcomere length relation in Equation 8,
- is the duration to reach peak tension in Equation 5,
- and
- are parameters for the strain-dependent relaxation duration in Equation 6, and
- is the parameter that represents the interaction between the adjacent muscle fibers in Equation 9.
Input File Usage
Use the following options to define the material parameters of the model:
ANISOTROPIC HYPERELASTIC, DEFINITION=USER, FORMULATION=INVARIANT, LOCAL DIRECTIONS=2, PROPERTIES=22 , , , , , , , , , , , , , , , , , , ,