Modeling the Electrical Response of Cardiac Tissue
You can use a special-purpose built-in material to model the electrical
behavior of cardiac tissue.
For additional information about how this material
model is used in combination with the Living Heart Human model, refer to the Living Heart
Human Model Guide.
Abaqus/Standard provides a special-purpose framework to model the electrical behavior of cardiac tissue and
to account for the coupling between the electric potential and the recovery variable. This
capability relies on a built-in implementation of user subroutine HETVAL and uses the mathematical
analogy between heat and electrical conduction. In this context, thermal quantities are
interpreted as their electrical counterparts, and the electrical analysis of the cardiac
tissue is run as the heat transfer analysis of an analogous thermally conductive material.
To activate this capability, the definition of the analogous thermally conductive material
must include the electric cardiac tissue material user type and parameter tables with a
declared type that starts with "ABQ_CARDIAC_ELEC." In addition, you
must specify the density, thermal conductivity, and specific heat of the analogous material,
three state-dependent variables, and heat generation.
A dedicated collection of parameter tables is available to include all the definitions
required for this material model. You can use the abaqus fetch
utility to obtain the file containing the type definitions of the parameter tables used by the
built-in material as
follows:
abaqus fetch job=ABQ_CARDIAC_TISSUE_types.inp
Input File Usage
Use the following options to activate the electrical model for cardiac tissue in Abaqus/Standard:
for the electric potential . The current density is given by Ohm’s law
in terms of the electrical diffusion tensor .
The source term represents the local action potential profile and is given by
in terms of
a normalized electric potential and , a time scaling factor. These normalizations are introduced to facilitate
the computations when using physiological values for the material parameters. The
normalization coefficients are = -80 mV, = 100 mV, and = 12.9 ms.
In these equations,
is a scaling parameter,
is the oscillation threshold, and
is the recovery variable.
The recovery variable is the solution of the evolution equation
where the source term characterizes the slow features of the action potential:
with
where
is the refractoriness,
is a phenomenological scaling parameter, and
and
are two parameters that control the shape of the restitution curve.
Analogous Thermal Conduction Formulation
As noted above, the electrical conduction equations (Equation 1-Equation 3) in cardiac tissue can be recast as the transient heat transfer
for the temperature in an analogous thermally conductive material with unit density and
specific heat, thermal conductivity tensor . Table 1 shows the correspondence between the electrical quantities pertaining to the cardiac
tissue and the thermal quantities relevant to the analogous thermally conductive
material.
Table 1. Correspondence between electrical and thermal quantities.
Electrical quantity
Thermal quantity
Electric potential,
Temperature,
Electrical diffusion tensor,
Thermal conductivity tensor,
Electrical source term,
Heat generation source term,
In addition, the evolution equation (Equation 4) for the recovery variable is recast as
which is solved in a built-in HETVAL subroutine that is used to
specify the heat generation source term in Equation 5.
The heat equation (Equation 5) and evolution
equation (Equation 6) are
solved using the transient heat transfer procedure in Abaqus/Standard.
Input File Usage
Use the following options to define the material parameters of the model:
This special-purpose material model makes use of solution-dependent state variables
(SDVs) to specify spatially dependent material parameters
and output and to record state variables (see About User Subroutines and Utilities). You must specify
at least three solution-dependent state variables, as described in Table 2.
Table 2. Label and description for each SDV.
SDV
Label
Description
1
GAMMA
The refractoriness if it is specified as an initial value for
SDV1.
Otherwise,
SDV1 is equal to 0.
2
ACTTIME
The activation time, ; that is, the first time when , if an electrical potential activation threshold is specified using the parameter table of type "ABQ_CARDIAC_ELEC_ACTIVATION".
Otherwise,
SDV2 is equal to 0.
3
R
The recovery variable, .
Input File Usage
Use the following option to allocate space for solution-dependent state
variables:
Optionally, you can define the spatial distribution of the refractoriness, , by specifying an initial value for
SDV1. Positive values specified as initial conditions for
SDV1 override the value specified in the parameter
table of type "ABQ_CARDIAC_ELEC_PARAMETERS_AP".
Input File Usage
Use the following option to define the spatial distribution of the
refractoriness:
This example illustrates defining the electrical analysis of cardiac tissue. A spatial
distribution of the refractoriness and a definition of the electrical potential activation
threshold are included for the purpose of the example.
This model is supported only in uncoupled transient heat transfer analyses (see Uncoupled Heat Transfer Analysis). It is recommended
to use the DELTMX parameter to allow
increment cutback when needed.
Thermal quantities have a special meaning for this material model and must be interpreted
as their electrical counterparts. For example,
GRADT
Gradient of the electric potential.
HFL
Current density.
NT11
Electric potential.
In addition to the standard output identifiers available in Abaqus/Standard (Abaqus/Standard Output Variable Identifiers), the following
variables have a special meaning for this material model:
SDV1
Refractoriness, , if specified as an initial value for
SDV1. Otherwise,
SDV1 is equal to 0.
SDV2
Activation time, .
SDV3
Recovery variable, .
References
Aliev, R.R., and A. V. Panfilov, “A Simple Two-Variable Model of Cardiac Excitation,” Chaos, Solitons & Fractals, vol. 7, no. 3, pp. 293–301, 1996.
Hurtado, D.E., and E. Kuhl, “Computational Modelling of Electrocardiograms: Repolarisation and T-Wave Polarity in the Human Heart,” Computer Methods in Biomechanics and Biomedical Engineering, vol. 17, pp. 986–996, 2014.