*SURFACE TENSION CONTACT ANGLE

Specify the surface tension contact angle property for a given contact interaction.

This option is used to specify the surface tension contact angle associated with a surface interaction definition where one of the surfaces has surface tension. It must appear immediately after theSURFACE INTERACTION option.

This page discusses:

See Also
*SURFACE INTERACTION
In Other Guides
Surface Tension Loads

Products Abaqus/Standard Abaqus/Explicit

Type Model data in Abaqus/Standard; Model or history data in Abaqus/Explicit

LevelModel in Abaqus/Standard; Model or Step in Abaqus/Explicit

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the surface tension contact angle, in addition to temperature. If this parameter is omitted, it is assumed that the surface tension depends only on temperature. See Material Data Definition.

Data lines to define the surface tension contact angle

First line
  1. Surface tension contact angle, θ (unit degree).

  2. Temperature, T . If this value is omitted, the surface tension is assumed to be independent of the temperature.

  3. First field variable, f 1 .

  4. Second field variable, f 2 .

  5. Etc., up to six field variables

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than six)
  1. Seventh field variable, f 7 .

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the surface tension contact angle as a function of the temperature and predefined field variables.