*SURFACE PROPERTY

Define named surface properties for cavity radiation or contact-based wear.

This option is used to define surface properties for cavity radiation analysis, contact-based wear modeling, or surface tension loads.

In the case of cavity radiation, this option must immediately precede the EMISSIVITY option. For contact based wear, this option must precede the WEAR SURFACE PROPERTIES option. For surface tension properties, this option must precede the SURFACE TENSION option.

This page discusses:

See Also
*EMISSIVITY
*WEAR SURFACE PROPERTIES
*SURFACE TENSION
In Other Guides
Cavity Radiation in Abaqus/Standard
Contact Wear
Surface Tension Loads

Products Abaqus/Standard Abaqus/Explicit Abaqus/CAE

Type Model data

LevelModel

Abaqus/CAE Interaction module

Required parameters

NAME

Set this parameter equal to a label that will be used to refer to the property name for cross-referencing to the surface definitions for which properties are being defined. For cavity radiation and surface tension, only element-based surfaces can be used.

There are no data lines associated with this option.