When you choose CSYS from the Create Datum
dialog box, the Method list displays the methods for creating a datum
coordinate system.
Datum coordinates systems are used throughout Abaqus/CAE; for example, to define material orientations and to define connector orientations. To help
you keep track of your datum coordinate systems, you can name the systems when you create
them, and the name appears alongside their entry in the Model Tree.
Define a rectangular, cylindrical, or spherical coordinate system by selecting the
origin and, optionally, two additional points. In the case of a rectangular system, the
second point defines the X-axis, and the
X–Y plane passes through the
second and third points, as shown in Figure 1. This is
the most versatile tool for creating a datum coordinate system, and you should use it
when possible. For detailed instructions, see Creating a datum coordinate system defined by three points.
Figure 1. Positioning a rectangular datum coordinate system by selecting the origin and two
points.
Offset from CSYS
Select a coordinate system; and provide the location of the rectangular, cylindrical,
or spherical datum coordinate system by specifying an offset, as shown by the example
involving a rectangular system in Figure 2. You can
specify the offset by entering a value or by selecting a point. For detailed
instructions, see Creating a datum coordinate system at an offset from another coordinate system.
Figure 2. Positioning a rectangular datum coordinate system by offsetting from another
coordinate system.
2 lines
Select two edges that define the rectangular, cylindrical, or spherical coordinate
system. In the case of a rectangular system, the first edge defines the
X-axis and the
X–Y plane passes through the
second edge, as shown in Figure 3. For
detailed instructions, see Creating a datum coordinate system defined by two lines.
Figure 3. Positioning a rectangular datum coordinate system by selecting two edges.
Rotate from CSYS
Select a coordinate system and an axis of rotation, and specify the angle through which
the datum coordinate system will be rotated to create a rectangular, cylindrical, or
spherical datum coordinate system, as shown by the example involving a rectangular
system in Figure 4. For detailed instructions, see Creating a datum coordinate system by rotating another coordinate system.
Figure 4. Positioning a rectangular datum coordinate system by rotating from another
coordinate system.