Field Mapper

Several capabilities in Abaqus and other SIMULIA products use the field mapper to provide spatial mapping of fields between domains having different mesh topologies.

The field mapper:

  • provides mapping between point, surface, and volume domains;
  • provides point-cloud mapping to surface and volume domains;
  • uses various search and mapping algorithms;
  • supports scalar, vector, tensor, and quaternion fields; and
  • allows evaluation of fields at nodes, at surface facet centers, and on element centers or integration points.

This section provides an overview of the field mapper with a focus on Abaqus capabilities. The various capabilities in Abaqus might use only a subset of the field mapper functionality. For further information about restrictions, consult the section describing the specific Abaqus capability.

The SIMULIA Co-Simulation Services (CSS) also uses the field mapper, where the CSS Configuration file specifies the mapper settings. This section does not address the CSS Configuration file settings, for that see Mapping Specification); however, it describes the mapping algorithm as it applies to the SIMULIA Co-Simulation Services.

This page discusses:

See Also
Sequentially Coupled Multiphysics Analyses
Co-Simulation
In Other Guides
*FIELD MAPPER CONTROLS
*EXTERNAL FIELD
*CO-SIMULATION

Products Abaqus/Standard Abaqus/Explicit