VUHYPER

This problem contains basic test cases for one or more Abaqus elements and features.

This page discusses:

Products Abaqus/Explicit

Features tested

User subroutine to define Mooney-Rivlin and neo-Hookean hyperelastic material properties.

User subroutine for hyperelastic model

Elements tested

C3D8R

CPS4R

Problem description

This set of verification problems tests the variables that are passed into user subroutine VUHYPER. In each test the material properties are specified using general hyperelastic material properties for the first element and the strain energy function and the associated derivatives defined in user subroutine VUHYPER for the second element.

Two different sets of material data are used, as described below.

Material 1

Polynomial (N=1), compressible.
C 10 = 80.0.
C 01 = 20.0.
D 1 = 1.0 × 10−3.

Material 2

Polynomial (N=1), compressible, field variable dependency included for user subroutine VUHYPER.
C 10 = 80.0.
C 01 = 20.0.
D 1 = 1.5 × 10−3.

Results and discussion

Since the same boundary conditions are applied on the corresponding nodes of the two elements, the results are expected to be identical in the two cases, thus verifying the use of user subroutine VUHYPER with the second element.

User subroutine for defining different hyperelastic models within the parallel rheological framework

Elements tested

C3D8R

Problem description

The tests in this section define different hyperelastic material models in different networks of a nonlinear viscoelastic material model using the parallel rheological framework (see Parallel Rheological Framework and *VISCOELASTIC). For the purpose of verification, the results are compared with those obtained using an element overlay approach. The element overlay consists of two elements sharing the same nodes. The first element of the overlay has material properties defined by a polynomial hyperelastic material model (Material 3), while the second element of the overlay uses a neo-Hookean hyperelastic model with a nonlinear viscoelastic network (Material 4), defined such that there is no contribution from the equilibrium network. A third element is introduced to test user subroutine VUHYPER in combination with a parallel rheological framework definition using the properties described in Material 5. The properties and stiffness ratios of Material 5 are defined such as to provide the exact same response as the overlay of Materials 3 and 4. The user subroutine defines the strain energy density function with a polynomial hyperelastic model for the equilibrium network (networkid=0 ) and with a neo-Hookean strain energy function for the nonlinear viscoelastic network, (networkid=1), as described in Material 5. All elements are subjected to the same uniaxial tension loading and the same boundary conditions.

Material 3

Polynomial (N=1), compressible.
C 10 = 40.0.
C 01 = 10.0.
D 1 = 2.0 × 10−3.

Material 4

Neo-Hookean, compressible, with one nonlinear viscoelastic branch defined by hyperbolic-sine creep model.
Network stiffness ratio, r 1 = 1.0 ( r 0 = 0.0).
The coefficients of neo-Hookean hyperelastic model are:
C 10 = 25.0.
D 1 = 2.0 × 10−3.
The coefficients of Hyperbolic-sine creep model are:
A = 2.5 × 10−5.
B = 0.3.
n = 1.0.

Material 5

User-defined hyperelastic material.
Network stiffness ratio, r 1 = 0.5 ( r 0 = 0.5).
C 10 = 80.0.
C 01 = 20.0.
D 1 = 1.0 × 10−3.
The user-defined hyperelastic properties of network 1 (N=1) are:
C 10 = 50.0.
D 1 = 1.0 × 10−3.
The coefficients of hyperbolic-sine creep model in network 1 are:
A = 2.5 × 10−5.
B = 0.15.
n = 1.0.

Results and discussion

Since the same boundary conditions are applied on the corresponding nodes of all the three elements, the reaction forces are the same for the nodes of the overlayed elements and the nodes of the element using the parallel rheological framework in combination with user subroutine VUHYPER. In addition, the sum of the stress components in the overlayed elements is equal to the corresponding stress components in the VUHYPER element.