*SURFACE TENSION

Define the surface tension of an element-based surface.

This option is used to define surface tension properties on an element-based surface. It must appear immediately after the SURFACE PROPERTY option.

This page discusses:

See Also
*SURFACE PROPERTY
In Other Guides
Surface Tension Loads

Products Abaqus/Explicit

Type Model data

LevelAssembly

Optional parameters

DEPENDENCIES

Set this parameter equal to the number of field variable dependencies included in the definition of the surface tension, in addition to temperature. If this parameter is omitted, it is assumed that the surface tension depends only on temperature. See Material Data Definition.

Data lines to define the surface tension

First line
  1. Surface tension, γ .

  2. Temperature, T . If this value is omitted, the surface tension is assumed to be independent of the temperature.

  3. First field variable, f 1 .

  4. Second field variable, f 2 .

  5. Etc., up to six field variables.

Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than six)
  1. Seventh field variable, f 7 .

  2. Etc., up to eight field variables per line.

Repeat this set of data lines as often as necessary to define the surface tension as a function of the temperature and predefined field variables.