*IMPORT NSET

Import node set definitions from a previous Abaqus/Explicit or Abaqus/Standard analysis.

This option is used to import node set definitions that were defined in a previous Abaqus/Explicit or Abaqus/Standard analysis. If the IMPORT NSET option is used, it must appear after the IMPORT option.

If the IMPORT NSET option is used with the RENAME parameter, it must appear after an IMPORT option with active RENAME and NOFFSET parameters.

If this option is omitted or is specified without any data lines and all IMPORT options that reference a previous analysis do not include the RENAME parameter, all the node sets relevant to the analysis are imported. References to nodes that are not imported are removed from imported sets.

This option is ignored if you specify the full-model input format in the *IMPORT CONTROLS option because data for all imported node sets are given in the input.

This page discusses:

See Also
*IMPORT
In Other Guides
Transferring Results between Abaqus/Explicit and Abaqus/Standard

Products Abaqus/Standard Abaqus/Explicit

Type Model data

LevelModel

Required parameter if the imported node sets are to be renamed

RENAME

Include this parameter to indicate that the imported node sets will be given new names.

Data lines to specify the node set definitions to be imported but not renamed

First line

  1. List of node sets that are to be imported. Specify only node set names that are used in the previous Abaqus/Explicit or Abaqus/Standard analysis.

Repeat this data line as often as necessary to specify the node sets to be imported. Up to 16 node sets can be listed per line.

Data lines to specify the node set definitions to be imported and renamed

First line

  1. The name of the node set to be imported. Specify only node set names that are used in the previous Abaqus/Explicit or Abaqus/Standard analysis.

  2. The new name of the node set in the import analysis.

Repeat this data line as often as necessary to specify the old and new names of the node sets to be imported.