Assign contact initialization methods for general contact.
This option is used to modify contact initialization methods for specific contact
interactions within the domain considered by general contact. It must be used in conjunction
with the CONTACT and CONTACT INITIALIZATION DATA options.
There are no parameters associated with this option.
Data lines to assign nondefault contact initialization methods
First line
The name of the first
surface. If the first surface name is omitted, a default surface that encompasses
the entire general contact domain is assumed.
The name of the second
surface. If the second surface name is omitted or is the same as the first surface
name, the specified contact initialization method definition is assigned to
contact interactions between the first surface and itself.
Optional data item
for Abaqus/Explicit when a CONTACT INITIALIZATION DATA,
INITIAL CLEARANCE definition
specified with
ADJUST=YES
is referenced:
Blank, the "words"
FIRST SURFACE SFC, or the "words"
SECOND SURFACE SFC to indicate how the surfaces
will be treated while adjusting the surface nodes to resolve contact clearance
violations. A blank entry indicates that the interaction will be treated as
balanced main-secondary. A setting of FIRST SURFACE
SFC or SECOND SURFACE SFC
specifies the behavior as a secondary surface of the first or second surface,
respectively, in a pure main-secondary interaction.
Repeat this data line as often as necessary. If the contact
initialization method assignments overlap, the last assignment applies in the overlap
region.