Element Section Variables

You can request element section variable output to the results or output database file. These variables are available only for beam, pipe, and shell elements with the exception of STH, which is also available for membrane and plane stress elements. They are defined for particular elements in the element descriptions in the Abaqus Elements Guide.

See Also
Element Output
Writing Element Output to the Output Database

The output variables listed below are available in Abaqus/Explicit.

STH
Field: yes  History: yes  .fil: yes  

Section thickness (shell, membrane, and plane stress elements only).

STHIN
Field: yes  History: yes  .fil: no  

Section thinning or thickening is defined as STHIN=1-STHSTHorig, where STHorig is the original thickness specified on the section definition for shell, membrane, and plane stress elements.

SFAILRATIO
Field: yes  History: no  .fil: no  

Section failure ratio across all the shell's layers defined as SFailRatio=numFailedLayersnumTotalLayers, where numFailedLayers is the number of failed layers (a shell layer is considered failed when all of the section points in the layer failed), and numTotalLayers is the total number of layers in the shell.

SF
Field: yes  History: yes  .fil: yes  

All section resultant components, both translational (forces) and rotational (moments).

SFn
Field: no  History: yes  .fil: no  

Section force per unit width of component n, n=1,2,3,4,5 for conventional shells; n=1,2,3,4,5,6 for continuum shells; n=1,2,3 for beams and pipes.

SMn
Field: no  History: yes  .fil: no  

Section moment per unit width of component n, n=1,2,3.

SORIENT
Field: yes  History: no  .fil: no  

Composite shell section orientations.

SE
Field: yes  History: yes  .fil: yes  

All section nominal strains, both translational and rotational (e.g., midplane strain and curvature in shells).

SEn
Field: no  History: yes  .fil: no  

Section nominal strain component n, n=1,2,3,4,5,6 for shells; n=1,2,3 for beams and pipes.

SKn
Field: no  History: yes  .fil: no  

Section curvature change or twist n, n=1,2,3.

SSAVG
Field: yes  History: no  .fil: yes  

All average membrane and transverse shear stress components (shell elements only).

SSAVGn
Field: yes  History: no  .fil: no  

Average membrane or transverse shear stress component n, n=1,2,3,4,5,6 (shell elements only).