*WAVE

ProductsAbaqus/Aqua

TypeModel data

LevelModel

Optional parameters

INPUT

Set this parameter equal to the name of the alternate input file containing the data lines for this option. See Input Syntax Rules for the syntax of such file names. If this parameter is omitted, it is assumed that the data follow the keyword line.

TYPE

Set TYPE=STOKES (default) to use Stokes fifth-order wave theory.

Set TYPE=AIRY to use Airy (linearized) wave theory.

Set TYPE=GRIDDED (Abaqus/Standard only) to use gridded data to define the fluid particle velocities, accelerations, free surface elevation, and dynamic pressure.

Set TYPE=USER to allow user-defined waves and update fluid variables like velocity, acceleration, free surface elevation, pressure, and pressure gradients.

Optional parameter for TYPE=AIRY

WAVE PERIOD: Include this parameter to indicate that the second field in the data line specifies the wave period, $τ_{N}$ . If this parameter is omitted, the second field in the data line specifies the wavelength, $λ_{N}$ .

Required parameter for TYPE=GRIDDED

DATA FILE: Set this parameter equal to the name of the file containing the gridded data. The file must be a sequential, binary-format file containing records in the format described in Abaqus/Aqua Analysis.

Optional parameters for TYPE=GRIDDED

MINIMUM: Set this parameter equal to the elevation below which point the structure is fully immersed for all time t. If this parameter is omitted, the elevation of the structure is compared against the instantaneous free surface to check for fluid surface penetration.
QUADRATIC: Include this parameter to indicate that quadratic interpolation of the wave data is used to determine information between grid points. If this parameter is omitted, linear interpolation is used.

Optional parameter for TYPE=USER

STOCHASTIC

This parameter applies only to Abaqus/Standard analyses.

Include this parameter to make the intermediate configuration available to user subroutine UWAVE. Set this parameter equal to a random number seed for use in stochastic analysis. If this parameter is omitted or is included without a value, a default value of 0.0 is used for the random number seed. This value is passed into user subroutine UWAVE. It is not used otherwise by Abaqus/Aqua.

PROPERTIES

This parameter applies only to Abaqus/Explicit analyses.

Set this parameter equal to the number of constant properties required for the user-defined wave. The default value is zero. This value is passed into user subroutine VWAVE as the integer argument NPROPS, whereas the property values are passed in as the real array PROPS.

DEPVAR

This parameter applies only to Abaqus/Explicit analyses.

Set this parameter equal to the number of state variables required for user-defined waves. The default value is zero. This value is passed into user subroutine VWAVE as the integer argument NSTATEVAR. The state variables are stored at the nodes of the elements on which the Abaqus/Aqua loads are applied and passed into user subroutine VWAVE as the real array argument STATEVAR. You must update the state variables in the user subroutine. They are initialized to zero at the beginning of each step.

Data line to define Stokes fifth-order waves (TYPE=STOKES)

First (and only) line

Wave height, H.
Period of wave, $τ$ .
Phase angle, $ϕ$ , in degrees.
Direction cosines giving the direction of travel of the wave, d. In three-dimensional cases both x- and y-components are needed; in two-dimensional cases only the x-component is used (in that case +1 means the wave travels in the direction of x increasing, and −1 means a component traveling in the direction of x decreasing).

Data lines to define Airy waves (TYPE=AIRY)

First line

Wave component amplitude, $a_{N}$ .
Wavelength of this component, $λ_{N}$ (default), or wave period of this component, $τ_{N}$ (if the parameter WAVE PERIOD is used).
Phase angle of this component, $ϕ_{N}$ , in degrees.
x-direction cosine defining the direction of the vector $d_{N}$ (the direction of travel for this wave component). In three-dimensional cases both x- and y-components are needed; in two-dimensional cases only the x-component is used (in that case +1.0 means the wave travels in the direction of x increasing, and −1.0 means a component traveling in the direction of x decreasing).
y-direction cosine defining the direction of the vector $d_{N}$ (the direction of travel for this wave component). This component is not needed in two-dimensional cases.

Repeat this data line as often as necessary to define multiple wave trains; one line per wave component.

Data line to define gridded wave data (TYPE=GRIDDED)

First (and only) line

Global x-coordinate of the origin of the wave data grid.
Global y-coordinate of the origin of the wave data grid.
Global z-coordinate of the origin of the wave data grid.
Direction cosine between the local x-axis of the wave data grid and the global x-axis. (Plus or minus one for two-dimensional analysis.)
Direction cosine between the local x-axis of the wave data grid and the global y-axis. (Zero for two-dimensional analysis.)

Data lines to define frequency versus wave amplitude data for stochastic user wave theory (TYPE=USER) in an Abaqus/Standard analysis

First line

Frequency (in cycles per time, for stochastic analysis only).
Wave amplitude.

Repeat this data line as often as necessary to define the wave spectrum. These data pairs are passed into user subroutine UWAVE. They are not used otherwise by Abaqus/Aqua.

Data lines to define wave theory (TYPE=USER) in an Abaqus/Explicit analysis

First line

Enter the properties required for the user-defined wave kinematics, separated by commas. These values will be passed into VWAVE as the real-array argument PROPS.

Repeat this data line as often as necessary to include all properties, with a maximum of eight values per line.