*USER OUTPUT VARIABLES

Specify number of user variables.

This option is used to allow Abaqus to allocate space at each material calculation point for user-defined output variables defined in user subroutine UVARM. If the USER OUTPUT VARIABLES option is used, it must appear within each of the relevant material or gasket behavior definitions.

This page discusses:

See Also
In Other Guides
UVARM

ProductsAbaqus/StandardAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

There are no parameters associated with this option.

 

Data line to specify the number of user variables

First (and only) line

  1. Number of user-defined variables required at each material point.