ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE
TypeHistory data
LevelStep
Abaqus/CAEStep module
Optional parameters
- VARIABLE
-
Set VARIABLE=ALL to indicate that all incrementation variables applicable to
this procedure type should be written to the output database.
Set VARIABLE=PRESELECT to indicate that the default incrementation output variables
for the current procedure type should be written to the output database.
Additional output variables can be requested on the data lines.
If this parameter is omitted, the incrementation variables requested for
output must be specified on the data lines.
Data
lines to request incrementation output
- First line
-
Give the identifying keys for the variables to be written to the output
database. The keys are defined in
Abaqus/Explicit Output Variable Identifiers.
Repeat this data line as
often as necessary to define the time incrementation variables to be written to
the output
database.