*EQUATION

Define linear multi-point constraints.

This option is used to define linear multi-point constraints in the form of an equation.

This page discusses:

See Also
In Other Guides
Linear Constraint Equations

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelPartPart instanceAssembly

Abaqus/CAEInteraction module

Optional parameters

INPUT

Set this parameter equal to the name of the alternate input file containing the data lines for this option. See Input Syntax Rules for the syntax of such file names. If this parameter is omitted, it is assumed that the data follow the keyword line.

Data lines to define an equation

First line

  1. Number of terms, N, in the equation.

Second line

  1. Node number or node set label, P, of first nodal variable, uiP.

  2. Degree of freedom, i, at above node for variable uiP.

  3. Value of A1.

  4. Node number or node set label, Q, of second nodal variable, ujQ.

  5. Degree of freedom, j, at above node for variable ujQ.

  6. Value of A2.

  7. Etc., up to four terms per line.

Repeat the second data line as often as necessary to define all of the terms of the equation. No more than four terms can be defined on a line. To define another constraint, repeat the entire set of data lines.