*DAMAGE STABILIZATION

Specify viscosity coefficients for the damage model for fiber-reinforced materials, surface-based cohesive behavior or cohesive behavior in enriched elements.

This option is used to specify viscosity coefficients used in the viscous regularization scheme for the damage model for fiber-reinforced materials, surface-based traction-separation behavior in contact or cohesive behavior in enriched elements.

  • For fiber-reinforced materials, you can use this option in conjunction with the DAMAGE INITIATION, CRITERION=HASHIN and DAMAGE EVOLUTION options.
  • For surface-based traction-separation behavior, you can use this option in conjunction with the DAMAGE INITIATION, CRITERION=MAXS, MAXU, QUADS, or QUADU and DAMAGE EVOLUTION options.
  • For XFEM, you can use this option in conjunction with the DAMAGE INITIATION, CRITERION=LARC05, MAXE, MAXS, MAXPE, MAXPS, QUADE, or QUADS and DAMAGE EVOLUTION options.

This page discusses:

See Also
In Other Guides
Viscous Regularization
Contact Cohesive Behavior
Modeling Discontinuities as an Enriched Feature Using the Extended Finite Element Method

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEProperty module

There are no parameters associated with this option.

 

Data lines to define viscosity coefficients for fiber-reinforced materials

First line

  1. Viscosity coefficient in the longitudinal tensile direction.

  2. Viscosity coefficient in the longitudinal compressive direction.

  3. Viscosity coefficient in the transverse tensile direction.

  4. Viscosity coefficient in the transverse compressive direction.

Data line to define viscosity coefficients for surfaced-based traction-separation behavior or cohesive behavior in enriched elements

First (and only) line

  1. Viscosity coefficient.