Specify contact mass scaling during the step.
This option is used to specify contact mass scaling during the step for part or all of the model.
This page discusses:
Products Abaqus/Explicit Abaqus/CAE
Type Model or history data
LevelModelStep
Abaqus/CAE Interaction module
Set LOCATION=NONE for no contact mass scaling.
Set LOCATION=ELEMENT MASS SCALING (default) to apply contact mass scaling only to surface nodes potentially involved in element mass scaling.
Set LOCATION=ALL CONTACT SURFACES to apply contact mass scaling to all the surface nodes involved in general contact.
Set LOCATION=SPECIFIED SURFACES to apply contact mass scaling only to the contact surfaces listed in the data lines.
List of contact surfaces, eight per line.
Repeat this data line as often as necessary.