*CONNECTOR CONSTITUTIVE REFERENCE

Define reference lengths and angles to be used in specifying connector constitutive behavior.

This option is used to define reference lengths and angles for constitutive response in connector elements.

This page discusses:

See Also
*CONNECTOR BEHAVIOR
In Other Guides
Connector Behavior

ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE

TypeModel data

LevelModel

Abaqus/CAEInteraction module

There are no parameters associated with this option.

 

Data line to define reference lengths and angles

First (and only) line

Enter a blank to use the (default) reference length or angle calculated from the initial geometry.

  1. Reference length associated with the connector's first component of relative motion.

  2. Reference length associated with the connector's second component of relative motion.

  3. Reference length associated with the connector's third component of relative motion. Only relevant for three-dimensional analyses.

  4. Reference angle (in degrees) associated with the connector's fourth component of relative motion. Only relevant for three-dimensional analyses.

  5. Reference angle (in degrees) associated with the connector's fifth component of relative motion. Only relevant for three-dimensional analyses.

  6. Reference angle (in degrees) associated with the connector's sixth component of relative motion.