ProductsAbaqus/StandardAbaqus/ExplicitAbaqus/CAE
TypeHistory data
LevelStep
Abaqus/CAEInteraction module
Required parameters
- NAME
-
Set this parameter equal to a label that will be used to refer to the
co-simulation event. The co-simulation name adheres to the naming convention
for labels (see
Input Syntax Rules),
except that it cannot begin with a number.
- PROGRAM
-
Set PROGRAM=MULTIPHYSICS for exchange of data between
Abaqus
and the
SIMULIA Co-Simulation Engine,
which in turn can exchange data with third-party analysis programs that support
the
SIMULIA Co-Simulation Engine.
Set PROGRAM=ABAQUS for exchange of data with another
Abaqus
analysis in an
Abaqus/Standard
to
Abaqus/Explicit
co-simulation.
Optional parameters
- CONTROLS
-
This parameter is required when PROGRAM=ABAQUS.
Set this parameter equal to the name of the co-simulation controls to be
used to define the coupling and rendezvousing scheme.
There are no data lines associated with this option.