SvgOptions object

The SvgOptions object stores the settings that Abaqus uses when printing in SVG format. The SvgOptions object has no constructor. Abaqus creates the svgOptions member when a session is started.

This page discusses:

Access

session.svgOptions

setValues(...)

This method modifies the SvgOptions object.

Required arguments

None.

Optional arguments

imageSize

The SymbolicConstant SIZE_ON_SCREEN or a pair of Ints specifying the width and height of the image in pixels. Possible values are (minWidth, minHeight )  imageSize   (maxWidth and maxHeight). The default value is SIZE_ON_SCREEN.

Note:

The minimum value of width and height (minWidth and minHeight) is the number of pixels that occupy 10 mm at the current screen resolution. The value is typically around 50 pixels and may be different for width and height.

The maximum value of width and height (maxWidth and maxHeight) is the largest number of pixels supported by the system graphics and will be at least as large as the screen dimensions.

Return value

None.

Exceptions

RangeError.

If either the width or height arguments of imageSize are out of range (where minWidth and minHeight are the number of pixels corresponding to approximately 10 mm for a given display and maxWidth and maxHeight are the largest allowable number of pixels supported by the system graphics):

RangeError: imageSize must be SIZE_ON_SCREEN or a sequence of 2 Ints in the range (minWidth, minHeight) <= (width, height) <= (maxWidth, maxHeight).

Members

The SvgOptions object has members with the same names and descriptions as the arguments to the setValues method.