setValues(...)
This method modifies the ConstrainedSketchOptions object.
Required arguments
None.
Optional arguments
- sheetSize
A Float specifying the sheet size. Possible values are Floats 0. The default value is the sheetSize specified with the Sketch method.
- gridSpacing
A Float specifying the spacing between gridlines. Possible values are Floats 0. The default value is approximately 2.5% of sheetSize.
- grid
A Boolean specifying whether the grid is shown. The default value is ON.
- gridFrequency
An Int specifying how often gridlines are shown. Possible values are gridFrequency 0. The default value is 1.
- dimensionTextHeight
A Float specifying the height of the dimension text in points. Possible values are Floats 0. The default value is 12.0.
- decimalPlaces
An Int specifying how many decimal places are shown in dimensions. Possible values are 0 decimalPlaces 6. The initial value depends on the value of sheetSize.
- constructionGeometry
A Boolean specifying whether construction geometry is shown. The default value is ON.
- gridSnap
A Boolean specifying whether the cursor snaps to the grid. The default value is ON.
- preselection
A Boolean specifying whether geometry will be preselected. The default value is ON.
- sheetAuto
A Boolean specifying if the sheet size and the grid spacing are automatically computed. The default value is ON.
- gridOrigin
A sequence of Floats specifying the X–Y coordinates for the origin of the grid. The default value is (0, 0).
- gridAngle
A Float specifying the angle of the grid relative to the computer screen. The default value is 0.0.
- viewStyle
A SymbolicConstant specifying the type of sketch displayed in the viewport. Possible values are REGULAR and AXISYM. The default value is REGULAR.
- addImpliedConstraints
A Boolean specifying if implied constraints are added during sketching. The default value is ON.
- maxCoplanarEntities
An Int specifying the maximum number of coplanar entities which should be automatically projected from the background, when a sketch based feature is created or edited. When this value is exceeded no entities are automatically projected and a warning issued. Possible values are maxCoplanarEntities 0. The default value is 300.
- autoConstrainAngularTolerance
A Float specifying the angular tolerance in degrees which is used to determine parallel and tangential conditions during the auto-constrain operation. For example any two lines which have an angle smaller than the given autoConstrainAngularTolerance will be assumed to be parallel, and a parallel constrain may be added during the auto-constrain operation. The default value is 0.01.
- autoConstrainLinearTolerance
A Float specifying the linear tolerance which is used to determine when two points or geometries are coincident during the auto-constrain operation. The default value is 10–6.
- autoConstrainOptions
A sequence of SymbolicConstants specifying which type of constraints may be added by the auto-constraint tool. Possible values are PARALLEL, PERPENDICULAR, IDENTICAL, TANGENT, CONCENTRIC, and EQUALRADIUS. The default value is (PARALLEL,, PERPENDICULAR,, IDENTICAL,, TANGENT,, CONCENTRIC,, EQUALRADIUS).
- dragMethod
A SymbolicConstant specifying the constraint solving mode used by the sketcher during drag operation. Possible values are MINIMUM_MOVE, STANDARD, WEIGHTED, and RELAXATION. The default value is MINIMUM_MOVE.
- editMethod
A SymbolicConstant specifying the constraint solving mode used by the sketcher during regular sketch editing and adding new constraints and dimensions. Possible values are MINIMUM_MOVE, STANDARD, WEIGHTED, and RELAXATION. The default value is STANDARD.
Return value
None.
Exceptions
RangeError.