Reading X–Y data from output database field output

You can read X–Y data from field output in the output database.

See Also
Saving an X–Y data object
Understanding “Temp” and other X–Y data object names
Controlling the form of complex results

Context:

Available data consist of field output that were saved during the analysis. From this output, you can select the following:

  • a variable at an output position—for example, S11 (stress in the 11-direction) at integration points; and

  • a single location or a set of locations (elements or nodes).

Abaqus/CAE then reads X–Y data pairs from the output database at the currently active steps and frames. If you select multiple variables or multiple locations, Abaqus/CAE reads the data pairs and creates a separate X–Y data object for each variable/location pair. For all time-based analyses, X-values are taken as total time from the start of the analysis. Y-values are taken as the corresponding values of the variable at the specified location.

Element-based field data extracted at nodes are controlled by the current settings for result averaging. For more information, see Understanding result value averaging.

When reading the X–Y data for element-based field output at any output position, Abaqus/CAE reads the field values from the specified position if the same position is available in the output database.

  1. Locate the XY Data from ODB Field Output options.

    Select ToolsXY DataCreate from the main menu bar, then choose ODB field output.

    The XY Data from ODB Field Output dialog box appears.

    Note:

    The XY Data from ODB Field Output dialog box lists all field output saved during the analysis (except quaternion variables). If this list is empty, field output is not available.

  2. Click the Position arrow to reveal possible positions at which to list variables for your selection; then choose the desired position.

    The list of variables is refreshed to show only those that can be read at the selected position.

  3. Select the field output variables to be read using either the check box next to each variable in the list or the Edit text field at the bottom of the page.

    To use the check box method:
    1. To select a variable and all of its components, click that variable's check box.

    2. To choose among the individual components of a variable, click the arrow next to that variable's check box to list its components; then click individual component check boxes to select them.

    To use the edit method:

    In the Edit text field, enter the names of the variables and components to be read. To be valid, a variable must be available on the output database for the current position.

  4. Click the Elements/Nodes tab.

    The Elements/Nodes options appear.

  5. From the Item list at the top left of the dialog box, select either Elements or Nodes.

    Abaqus refreshes the Selection Method list at the bottom of the dialog box and the item list at the right.

  6. Select the specific elements or nodes for which to read output data.

    • To specify elements or nodes by picking them directly from the viewport:

      1. Choose Pick from viewport from the Selection Method list.

        Abaqus/CAE enters the pick mode. Select items for the display group (where items are elements or nodes) appears in the prompt area.

      2. Select one or more items from the viewport (for more information, see Selecting objects within the viewport”). The items are highlighted in the viewport.

        Note:

        If you click Done in the prompt area, Abaqus/CAE exits the pick mode and your selections disappear; you must choose a Selection Method from the list.

    • To specify elements or nodes by number:

      1. Choose Element labels or Node labels from the Selection Method list.

        The Part instance and Labels fields appear.

      2. Select the name of the part instance for which you are obtaining results from the list in the Part instance field. Type into the Labels field a list of element or node numbers separated by commas or a range of numbers such as 1:4.

      3. Verify your selection by clicking Highlight Items in Viewport.

    • To specify elements or nodes by set name:

      1. Choose Element sets or Node sets from the Selection Method list.

        Abaqus refreshes the item list at the right. If this list is empty, there are no items that meet your selection criteria.

        Note:

        This list does not include the internal sets generated by Abaqus/CAE.

      2. Select one or more set names from the item list. (For more information, see Selecting multiple items from lists and tables.) If your model contains many sets, you can use the filter to reduce the number of set names displayed. Click next to the Filter field to see examples of valid filtering syntax.

      3. Verify your selection by toggling Highlight items in viewport.

    • To specify elements or nodes belonging to internal sets (sets created by Abaqus/CAE):

      1. Choose Internal sets from the Selection Method list.

        Abaqus refreshes the item list at the right. If this list is empty, there are no items that meet your selection criteria.

      2. Select one or more set names from the item list. (For more information, see Selecting multiple items from lists and tables.) If your model contains many internal sets, you can use the filter to reduce the number of set names displayed. Click next to the Filter field to see examples of valid filtering syntax.

      3. Verify your selection by toggling Highlight items in viewport.

    The following table summarizes the restrictions that exist on the availability of element or node data for the output position specified on the Variables page:

    Output position Available for
    Integration point Elements
    Centroid Elements
    Element nodal Elements or nodes
    Unique nodal Nodes

  7. Click Active Steps/Frames to change the steps or frames from which Abaqus/CAE reads X–Y data. For more information, see Activating and deactivating steps and frames.
  8. If the data include complex numbers, you can select the displayed form using the Result Options dialog box. For more information on complex number forms in Abaqus/CAE, see Controlling the form of complex results.
  9. To evaluate and display the data, click Plot.

    An X–Y plot appears in the current viewport. The plot represents the data you have configured in the dialog box, which Abaqus considers temporary data whether or not you have clicked Save to save it.

  10. To save the data you have configured, click Save. Any complex data are saved as the current complex form, not as complete complex numbers.

    Note:

    To plot your saved X–Y data, select ToolsXY DataPlot from the main menu bar and choose the X–Y data from the pull-right menu.

  11. When you have finished, click Dismiss to close the dialog box.