Defining a generalized profile

When you create a generalized profile, you provide the engineering properties of the section directly in the Edit Profile dialog box. For more information, see Beam Section Behavior.

See Also
Defining profiles
Defining sections
In Other Guides
Using a General Beam Section to Define the Section Behavior
  1. Display the Edit Profile dialog box, as described in Choosing a profile type.
  2. In the Area field, enter the area of the profile shape.
  3. In the I11 field, enter the moment of inertia for bending about the 1-axis of the section.
  4. In the I12 field, enter the moment of inertia for cross-bending.
  5. In the I22 field, enter the moment of inertia for bending about the 2-axis of the section.
  6. In the J field, enter the torsional constant.
  7. If the profile describes an open-section beam, enter the following:

    • In the Gamma O field, enter the sectoral moment, Γ0.

    • In the Gamma W field, enter the warping constant, ΓW.

  8. Click OK to save the profile and to close the Edit Profile dialog box.