You can use the Property module to define materials, sections, and composite layups as well as other properties of a part or part region.
You can use the Property module to perform the following tasks:
Define materials.
Define beam section profiles.
Define sections.
Assign sections, orientations, normals, and tangents to parts.
Define composite layups.
Define a skin reinforcement.
Define inertia (point mass, rotary inertia, and heat capacitance) on a part.
Define springs and dashpots between two points or between a point and ground.
Define material calibrations.
For information on defining inertia, see Inertia. For information on defining skin reinforcements, see Skin and stringer reinforcements. For information on defining springs and dashpots, see Springs and dashpots.