AutoCAD (file extension .dxf)
IGES (file extension .igs)
ACIS (file extension .sat)
STEP (file extension .stp)
When you import a file as a stand-alone sketch, Abaqus/CAE translates the contents of the file into a set of Sketcher entities, such as lines, arcs, and circle. Abaqus/CAE can import most planar entities from an IGES-format file. For a complete list of the
IGES entities that can be imported into a sketch, see IGES entities recognized by Abaqus/CAE when importing a part or a sketch. When you import an AutoCAD- or ACIS-format file, Abaqus/CAE recognizes only the entities listed in Table 1 and Table 2. If Abaqus/CAE finds geometry that it cannot translate, it ignores that geometry and continues
importing the sketch.
Table 1. AutoCAD entities supported by the Sketcher.AutoCAD entity | Sketcher entity |
---|
Line |
Line |
Circle |
Circle |
Arc |
Arc |
Vertex |
Point |
Table 2. ACIS entities supported by the Sketcher.ACIS entity | Sketcher entity |
---|
Line |
Line |
Circle |
Circle |
Arc |
Arc |
Vertex |
Point |
Ellipse |
Ellipse |
Spline and polyline |
Spline |
For Abaqus/CAE to convert the file to a sketch, the file must contain a two-dimensional planar profile that can be mapped to the sketch plane. If the file contains three-dimensional geometry, Abaqus/CAE cannot import the sketch.
In some cases, when you import a sketch to create the base feature of a part, Abaqus/CAE positions the sketch relatively far from the Sketcher origin. As a result, the part will be far from its origin, and the analysis of your model can be affected by a loss of precision. To improve precision, you may have to move the part closer to its origin by moving the vertices of the sketch closer to the origin of the Sketcher grid. For more information, see The Sketcher sheet and grid.