ABQ_EChemSET_Electrode_PowerLoss

This parameter table type is used in modeling the solid electrolyte interface in a solid state battery to specify the joule heat fraction losses within the electrode and separator regions.

This page discusses:

See Also
Modeling Solid Electrolytes and Solid-State Batteries

Products Abaqus/Standard

You must include a parameter table of type "ABQ_EChemSET_Electrode_PowerLoss" in the table collection definition to specify the Joule heat fraction losses within the electrode and separator regions.

Parameter Table Type Definition

PARAMETER TABLE TYPE, NAME="ABQ_EChemSET_Electrode_PowerLoss", PARAMETERS=2
 FLOAT, 0.0, "
						
							
								
									β
								
								
									3
								
							
						
					", , ,
 FLOAT, 0.0, "
						
							
								
									β
								
								
									4
								
							
						
					", , ,

Parameters

β 3
Fraction of ohmic loss in the electrode.

Default value is zero.

β 4
Fraction of ohmic loss in the electrolyte.

Default value is zero.